







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Kitchen Remodeling: The Enterprise Owner’s Guide
We install Cover-compatible kitchen remodeling in Enterprise, and a full kitchen project typically runs $14,000 – $45,000 installed, with cabinet-only work landing at $4,000 – $13,000. Cover-labeled kitchens often fail at the cabinet box seams and door hinges first, or at the countertop caulk line where a dropped pan cracked the edge. Owners usually find out when a cabinet door swings crooked, a drawer bottom sags, or the counter edge chips and the laminate lifts.

Which Cover Models This Applies To

Cover built semi-custom and stock cabinet lines over the years, and the part you need depends on which series your kitchen came from. The fastest way to identify yours is the interior label on the inside of a cabinet door or the underside of a drawer box – that sticker prints the series name, box depth, and hinge pattern. Measure the door width and height to the nearest 1/16 inch and note the hinge cup bore (the round hole the hinge sits in), usually 35mm on Cover doors. OEM doors are still made to original specs for most series, but a quality aftermarket door in the same overlay and finish is often the better value when the OEM lead time runs long.
We’re an independent service provider, not affiliated with Cover. When we source Cover-compatible parts for a kitchen in Enterprise, we match the box dimensions and hinge pattern first, then the door style. KraftMaid, Cambria, and Silestone products we carry through our material partnerships fit many of the same openings if you want to upgrade rather than match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Kitchen Remodeling Is Failing
- Door hinges sag or pop. The hinge screws pull out of the particleboard box over time, especially in dry desert air where the material shrinks. A door that no longer closes flush usually means the hinge plate has lost its grip.
- Drawer bottoms bow or crack. Thin 1/4-inch bottoms fail under heavy pots, and the side grooves split. You’ll feel a drawer drag or hear it scrape when you push it in.
- Countertop edge chips or caulk pulls away. Laminate edges chip at the front lip and the caulk line at the backsplash separates as the cabinet box shifts. Water gets behind it and swells the substrate.
- Cabinet boxes separate at the seams. The glue joints at the corners open up, and the box racks out of square. Doors and drawers stop lining up as a result.
- Finish peels or blisters near the sink. Steam and splashes break down the finish on the stiles and rails. Once the finish lifts, the raw material underneath is exposed to moisture.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Pricing in Enterprise runs roughly $14,000 – $45,000 for a full Cover kitchen remodel, $9,000 – $20,000 for a small kitchen, $4,000 – $13,000 for cabinet installation, and $2,000 – $6,500 for countertops. Backsplash work is $800 – $2,500 and a kitchen island runs $3,000 – $10,000. What drives the range is cabinet count and door style, countertop material (laminate versus quartz or stone), and whether plumbing or electrical needs to move.
Every quote is a written price delivered before any work starts, with parts and labor shown as line items. Our technicians have up to 22 years of experience, and the finished work carries the 365-Day Done Right Promise: if something isn’t right within 365 days of completion, we make it right at no cost to you.
DIY or Call Us?
You can safely check the label inside a cabinet door, measure a door or drawer, and tighten a loose hinge screw with a screwdriver. Where DIY goes wrong is pulling a cabinet box off the wall, cutting a countertop opening for a sink, or moving a gas line or outlet for an island. A gas line in particular is not a project to attempt without a licensed professional; a leak is a real hazard. Call us at (844) 797-6157 and we’ll give you a written price before any work begins.
FAQs

How long does a Cover kitchen last? A Cover cabinet box in Enterprise typically holds up 15 – 20 years, but the dry desert air and intense summer heat dry out the particleboard faster than in a humid climate, so hinges and drawer slides often need replacing around the 10-year mark. Call (844) 797-6157 for an exact replacement quote – estimates are free.
Can the part be repaired instead of replaced? Many Cover cabinet problems can be repaired if the box is still square: hinge and slide swaps, drawer bottom replacement, and re-caulking the counter edge are all common repairs. If the box has racked out of square or the substrate has swollen, replacement is the better call. We’ll tell you honestly which one applies.
How long does the swap take? A single door, drawer, or slide swap is usually a same-visit job. A full cabinet install or countertop replacement is a scheduled project, not a same-day repair. Call (844) 797-6157 and we’ll give you a realistic timeline with your written price.
How do you source the part? We identify your Cover series from the label and match box dimensions, hinge bore, and door style, then order OEM or a vetted aftermarket equivalent. We don’t stock parts or carry them on a truck; each part is ordered to your kitchen’s spec.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












