







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Enterprise Owner’s Guide
A CWS bathroom remodel in Enterprise typically runs $9,000 – $28,000 installed, depending on whether you keep the existing footprint or move plumbing and tile. Our technicians have up to 22 years of experience and deliver a written price before any work starts. Most owners don’t arrive at a remodel because a single part failed; they arrive because the bathroom has quietly reached the end of its service life. Caulk lines crack along the shower pan, grout erodes at the wall joints, the subfloor feels spongy near the toilet flange, and the vanity cabinet has swollen at its base from years of steam. In Enterprise’s dry desert air, those small failures compound faster than most people expect once the wet zone starts losing its seal.

Which CWS Models This Applies To
CWS bathroom components show up across the manufacturer’s standard and contractor-series lines, and the parts don’t cross over casually. A vanity top cut for a 30-inch contractor-series cabinet won’t drop onto a standard 31-inch base; a shower valve cartridge keyed to one series won’t seat in another. Before anything is ordered, we read the model and serial label, usually inside the vanity door or behind the toilet tank, and match it against the spec sheet. Only then do we make the OEM-versus-aftermarket call. For a valve cartridge or a shower pan, the OEM part is worth the premium because tolerances are tight. For a vanity top, a quality aftermarket surface like Cambria or Silestone works well and can save real money. We also service KraftMaid cabinets when a remodel mixes brands. We’re an independent service provider and not affiliated with CWS, so we quote what actually fits your model instead of defaulting to a single catalog.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
- Cracked caulk and grout lines: movement in the shower pan or a settling subfloor breaks the seal, letting moisture into the framing behind the tile.
- Spongy floor near the toilet: a slow flange or wax-ring leak has been soaking the subfloor, often for months before anyone notices.
- Swollen or delaminating vanity base: steam and occasional splashes have reached the cabinet core, and particleboard swells once and never recovers.
- Shower valve that drips or runs hot and cold: the cartridge has worn out, a common failure on CWS fixtures after years of mineral-heavy water.
- Peeling paint and loose drywall above the shower: moisture is escaping the wet zone because the tile backer or waterproofing membrane has failed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Enterprise, a full CWS bathroom remodel runs $9,000 – $28,000. A small bathroom remodel lands at $5,000 – $12,000, a walk-in shower installation at $4,500 – $12,000, a tub-to-shower conversion at $3,500 – $10,000, a shower replacement at $3,000 – $8,500, and a vanity installation at $800 – $3,000. The range moves on footprint, tile choice, plumbing relocation, and whether we’re replacing wet-zone backer board. Every price is itemized in writing before work begins, and the finished work carries the same written guarantee as every project we take on.
DIY or Call Us?
You can safely check the label on your CWS fixture, measure the cabinet opening, and note whether the floor feels soft underfoot. Beyond that, the work turns risky. As soon as the job involves the shower valve, supply lines, or the drain flange, you’re working with water and pressure, and a small mistake becomes a hidden leak behind a wall. That’s where we come in. Call (844) 797-6157 for a free estimate and an exact price on the CWS bathroom work you need in Enterprise.
FAQs

How long does a CWS bathroom remodel last? A properly waterproofed CWS bathroom lasts 20 to 30 years on tile and fixtures, with the shower membrane and caulk lines needing attention well before then in Enterprise’s climate.
Can the part be repaired instead of replaced? Sometimes. A worn cartridge or a hairline crack in a vanity top can often be repaired, but a failing shower membrane or a soft subfloor usually has to be replaced to stop the damage.
How long does the swap take? A vanity or shower replacement takes one to three days, while a full CWS bathroom remodel typically runs one to three weeks depending on scope.
How do you source the part? We read your model and serial label, match it against the spec sheet, and choose OEM or a vetted aftermarket equivalent based on what actually fits.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












