







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Kitchen Remodeling: The Enterprise Owner’s Guide
CWS doesn’t make a “kitchen remodeling” part – CWS makes the doors, drawers, and cabinet components that kitchen remodeling in Enterprise depends on, and replacing a failed CWS cabinet box, drawer glide, or door assembly typically runs $4,000 – $13,000 installed when you’re doing cabinet work, or $14,000 – $45,000 for a full CWS kitchen remodel. We’re an independent service provider, not affiliated with CWS, and we source CWS-compatible parts and quote them in writing before a single tool comes out of the van.

Most Enterprise owners find the problem the same way: a cabinet door that won’t stay shut on a hot afternoon, a drawer that grinds instead of gliding, or a hinge plate that’s pulled loose from the frame and won’t hold a screw anymore. In a rental-heavy part of the valley where kitchens get worked hard and cabinets weren’t always spec’d for it, those failures show up on a schedule.
Which CWS Models This Applies To

CWS cabinet lines show up in Enterprise homes as everything from builder-grade door-and-box setups in 1990s tract houses to newer semi-custom runs in the master-planned communities west of the Strip. Before we quote anything, we need to know which CWS series you actually have – because hinge cup patterns, drawer glide mounting points, and box depths changed across CWS’s production runs, and a glide that fits one series won’t seat in another.
Here’s how we identify your part. Look for the CWS label inside the cabinet door or on the back of the drawer box; if it’s worn off, we measure the hinge cup bore (the round recess in the door), the door overlay, and the glide’s mounting-hole spread. Those three measurements tell us the series even when the sticker is long gone. On the OEM-versus-aftermarket question: for structural parts like hinges and glides, a quality aftermarket equivalent is often the smarter buy because it’s built to the same bore pattern and frequently outlasts the original. For visible parts – doors, drawer fronts, finished panels – matched CWS OEM is usually the only way to get a finish and grain that lines up with the rest of the run. We’ll tell you which side of that line a part falls on before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Kitchen Remodeling Is Failing
- Doors that swing open or won’t close flush. The hinge has lost tension or the cup screws have wallowed out the pressboard. In Enterprise’s dry summer air, cabinet wood shrinks slightly, and hardware that was snug in spring works loose by July.
- Drawers that grind, stick, or fall off the track. The glide’s nylon rollers or the metal track have worn or the box has racked out of square. Once a roller flattens, the drawer drops and starts catching on the frame.
- Cabinet boxes separating at the joints. Heat cycling and low humidity work the glue line and fasteners loose. You’ll see a gap at the corner or feel the box flex when you open a door.
- Soft or swollen cabinet bottoms under the sink. A slow supply-line weep or a dishwasher leak swells the particleboard. By the time you see staining, the box floor is often too soft to hold a new part.
- Finish peeling or checking on doors and fronts. Sun through a west-facing kitchen window bakes the finish, and Enterprise’s UV load is hard on thermofoil and painted fronts. Once it checks, the door needs replacement, not touch-up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what CWS-compatible kitchen work actually runs in Enterprise. Every one of these comes with a written, line-item price before work starts, so you see parts and labor separately and there are no surprise invoices at the end.
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Full kitchen remodel: $14,000 – $45,000
What drives the range: how many boxes and doors you’re replacing, whether the part is OEM or a matched equivalent, and whether the failure exposed a soft box or a water problem behind it. Labor includes removal of the failed part, fitting and alignment, and cleanup. The finished work is covered by our 365-Day Done Right Promise, and if a repair or installation fails inside that window, we come back at no charge.
DIY or Call Us?
Some of this you can safely check yourself. Open and close every door and drawer and note which ones misbehave, measure your hinge cup bore and glide mounting spread, and photograph the CWS label before it fades further. That’s information we can use.
Where DIY goes wrong: forcing a new glide into a box that’s out of square, or re-driving hinge screws into swollen particleboard that will just strip again – you end up with a bigger repair and a stripped frame. And if you find water damage under the sink, stop there; a soft cabinet floor isn’t a parts swap, it’s a rebuild. Call us at (844) 797-6157 and we’ll tell you straight whether you’re looking at a $40 part or a box replacement, with a written price before anything is ordered.
FAQs

Quality CWS boxes and doors generally hold 15 – 20 years in a climate-controlled kitchen, but hardware like glides and hinges typically wears out first – often in 7 – 12 years of daily use. Enterprise’s dry heat and heavy summer AC cycling work cabinet wood constantly, and that shortens both numbers. Call (844) 797-6157 for an honest read on whether your parts are worth replacing.
Often yes. A single failed hinge or glide can be swapped without touching the rest of the cabinet, and a loose door can sometimes be re-hung on new hardware. Repair stops making sense when the box itself is soft, out of square, or water-damaged – at that point replacing the box is cheaper than chasing the failure. We’ll give you the written price for both paths so you can decide.
A straight hardware swap on a few doors or drawers is usually a short single visit. Replacing cabinet boxes, doors, or a full run is a planned job measured in days, not hours – and we schedule it like one. You’ll get a realistic timeline in your written quote, not a guess on the phone.
We match your CWS series from the label or, failing that, from hinge bore and glide measurements, then quote the exact part and its price in writing. We don’t stock parts and nothing rides on a truck – every part is ordered for your job, which is why the compatibility check happens first. Call (844) 797-6157 for your free estimate, and we’ll confirm what fits before you spend a dollar.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












