







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Windows & Doors: The Enterprise Owner’s Guide
We install CWS-compatible windows and doors for Enterprise homeowners, with typical installed prices running $4,500 – $15,000 for window replacement and $8,000 – $25,000 for impact-rated units, and we handle the whole job on a written quote before any work starts. If you’re here, something has probably failed on a CWS window or door you already own. The usual story: a window that won’t latch, a slider that grinds or leaks air, a fogged double-pane, or a door that’s gotten hard to close as the frame has shifted. You’ve narrowed it to the glass unit, the hardware, or the frame – and you want the right part for your exact CWS model, a price you can trust, and someone who knows how these units behave in southern Nevada heat.

Mason Remodeling Enterprise is an independent service provider. We aren’t affiliated with CWS, but we work on their products regularly and know the common failure points.
Key Takeaways:
- Installed replacement for a CWS window in Enterprise typically runs $4,500 – $15,000; impact-rated glass pushes toward $8,000 – $25,000.
- Match the part to your unit’s label and measured dimensions – CWS model numbers aren’t interchangeable across series.
- Glass unit swaps and hardware repairs are often more affordable than a full window replacement.
- Our technicians have up to 22 years of experience with windows and doors, and every job gets a written price up front.
Which CWS Models This Applies To

CWS builds and supplies window and door products across several series – sliding glass doors, single-hung and double-hung windows, and fixed or awning units – and the parts are not universal across those lines. A latch, roller, weatherstrip, or glass unit that fits one series won’t necessarily fit another even when the openings look identical. The reliable way to identify your unit is to find the manufacturer’s label, usually on the inside of the frame or in the head jamb channel, and read off the model and series information before you order anything. If the label is gone, we measure the glass unit and frame opening precisely; that measurement, plus the rough opening dimensions, is what actually lets us match the right glass, hardware, or full assembly.
The OEM-versus-aftermarket decision for CWS comes down to what’s failed. For moving hardware – rollers, latches, locks, and weatherstrip – a quality aftermarket equivalent from a reputable supplier often works fine and costs less, as long as the spec matches. For the glass unit itself, matching the original glass thickness, tint, low-E coating, and tempered or impact rating matters more than the brand name on the box, and in Enterprise you’ll want the solar performance right because our sun is unforgiving.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Windows & Doors Is Failing
Windows and doors rarely fail all at once. They give you signals months before something stops working. Here’s what the early warnings usually look like, and what’s really going on underneath.
- Fogging or condensation between the panes. The seal on the insulated glass unit has failed, letting moisture in. The glass itself isn’t broken, but the unit needs replacing to restore clarity and insulation.
- Drafts or a whistling sound at the edges. Weatherstrip has compressed, cracked, or pulled loose. The fix is usually a re-seal or new weatherstrip, but it can also signal a frame that’s shifted or settled.
- A slider that grinds, sticks, or jumps the track. The rollers or track are worn or out of alignment. Debris in the track makes it worse, and in dusty Enterprise conditions that happens faster than you’d expect.
- A latch that won’t catch or a lock that won’t turn. The hardware is worn or the door has racked out of square. On a door, this is often a hinge or frame issue, not just a lock.
- A door that’s suddenly hard to close or dragging along the bottom. The frame has shifted or the threshold has settled. Ignoring it stresses hinges and can crack glass if the movement forces the frame further.
Any one of these is worth a look. Two or more together usually means the whole unit is due for attention, not just a single part.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what CWS window and door work typically costs for Enterprise homeowners, installed:
| Service | Typical Installed Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
The range depends on how many openings, the size and type of window, whether it’s impact-rated or standard glass, and the condition of the surrounding frame. A single fogged glass unit swap sits at the low end; a whole-home window replacement sits at the high end. What drives the number most in Enterprise is the glass spec – impact-rated, low-E, and solar-control glass cost more than basic clear glass.
We give you a written, line-item price before any work starts, so you can see the parts cost and the labor cost separately. Every project carries our 365-Day Done Right Promise: if something we install isn’t right within 365 days of completion, we come back and make it right at no cost to you. No surprise invoices, no verbal estimates that grow on the final bill.
DIY or Call Us?
Some things are safe to check yourself. You can clear debris out of a slider track, look for a worn weatherstrip, and confirm your glass label and model number. That information helps you – and us – order the right part. You can also try a light cleaning and re-lubrication of a track to see if a grind is just dirt.
Where it goes wrong is the glass unit itself. Replacing insulated glass and re-setting a window or door frame is not a weekend task. The glass is heavy and fragile, the unit has to be sealed properly to avoid water intrusion, and if the frame has shifted, forcing a new unit into a bad opening makes the problem worse – and can break glass. As part of The Threshold Standard, every technician who comes to your home is background-checked, identity-verified, and introduced to you by name and photo before the visit, plus a photo ID badge at the door. Call (844) 797-6157 and we’ll tell you honestly whether you’re looking at a repair, a part, or a full replacement.
FAQs

How long should a CWS window last in Enterprise? Most quality windows hold up 20 to 30 years, but in southern Nevada’s heat the insulated glass seal often fails first – typically in 10 to 15 years – which shows up as fogging between the panes. Hardware like rollers and weatherstrip wears faster, often in 5 to 10 years. Call (844) 797-6157 for an exact quote – estimates are free.
Can my CWS window be repaired instead of replaced? Often, yes. A fogged glass unit can be swapped without replacing the whole window, and worn hardware is usually repairable. If the frame is warped or the unit is badly out of square, replacement is the better answer. We’ll tell you which is which after we’ve seen it. Call (844) 797-6157 for a free estimate.
How long does a window swap take? A single glass unit swap or hardware repair is often done in a few hours. A full window or door replacement on one opening typically takes a day, and multiple openings run longer. We’ll give you a realistic timeline in writing before we start. Call (844) 797-6157 to schedule your free estimate.
How do you source the right CWS part? We start with your unit’s label and model number, and if that’s missing, we measure the glass and frame precisely and match the glass thickness, tint, and energy rating so the new part performs like the original. We source OEM-spec and quality aftermarket parts and tell you which is which before you commit. Call (844) 797-6157 for a free estimate. We also service KraftMaid, Cambria, and Silestone products across the home.
If your CWS windows or doors are giving you trouble, don’t sit on it while the problem grows. Call Mason Remodeling Enterprise at (844) 797-6157 for a free estimate. We’ll give you a written price before any work begins, a real person answers the phone any time, and our 365-Day Done Right Promise covers whatever we install for a full year.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












