A Mason company - serving Enterprise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Delta · Enterprise

Delta Bathroom Remodeling in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Bathroom Remodeling: The Enterprise Owner’s Guide

Delta bathroom remodeling in Enterprise typically runs $9,000 to $28,000 for a full remodel, and most Delta fixture and valve replacements we handle are completed in a single day. If your Delta shower valve drips, your Delta faucet handle spins loose, or a Delta trim kit no longer sits flush against the wall, the cause is usually a worn cartridge, seal, or trim component rather than the whole fixture. In Enterprise, we most often see Delta failures show up as a slow drip at the shower handle that stains the tile below, or a tub spout that pulls away from the wall because the diverter has worn through.

Two construction workers carrying drywall panel in a residential home hallway in Enterprise, NV

Call (844) 797-6157

Which Delta Models This Applies To

A tile setter installing wall tile in a shower

Delta’s lineup splits into a few families, and the part you need depends entirely on which one you have. The Monitor and Monitor 13/14 series shower valves use the gray plastic RP cartridge family, while the newer MultiChoice universal valve (R10000-UNWS and its relatives) takes the RP46074 or RP19804 cartridge. Faucets in the Classic, Foundations, and Windemere lines each take their own stem assembly. The single gotcha that catches most Enterprise owners: a MultiChoice valve looks nearly identical to the older Monitor valve from the outside, but the cartridges do not interchange. If you buy the wrong RP number, it won’t seat, and the drip continues.

To identify yours, look for the stamped model number on the valve body behind the trim plate (turn the water off first, or just snap a photo with a flashlight), or read the handle escutcheon. OEM Delta cartridges are the safe choice because the seating tolerances are exact; quality aftermarket equivalents exist and can cost 40 to 60 percent less, but they’re only worth it when the seller lists the exact RP number. For surrounding finishes, we also install KraftMaid vanities, Cambria and Silestone tops, and matching trim so the new valve doesn’t sit under a mismatched escutcheon. Mason Remodeling Enterprise is an independent service provider and not affiliated with Delta.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Bathroom Remodeling Is Failing

  • A steady drip from the shower head or tub spout after the valve is off. The cartridge’s internal seals have worn, letting water bypass. In Enterprise’s hard, mineral-heavy water, this accelerates because scale scratches the cartridge surface.
  • The handle is stiff, grinds, or won’t turn smoothly. The cartridge barrel has scored or the balancing spool is stuck. Ignoring it usually cracks the handle stem next.
  • The tub spout pulls away from the wall or leaks at the base. The diverter gate inside the spout has failed, so water escapes the seam instead of diverting up to the shower head.
  • Water temperature swings when someone flushes a toilet. On a Delta Monitor valve this often points to a stuck pressure-balancing spool, not the cartridge itself, so the fix is different from what most people expect.
  • Rust or a chalky crust at the escutcheon plate. A slow weep has been running behind the trim long enough to corrode the plate. That’s the point where a hidden leak can reach the drywall behind the tile.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

Here’s what Delta fixture work and the surrounding bathroom remodeling typically cost in Enterprise, so you can self-qualify before you call:

Project Installed Range (Enterprise)
Full bathroom remodel (Delta fixtures included) $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

The range depends on whether we’re swapping a cartridge and trim or replacing the whole valve behind the wall, and on what the tile and drywall behind it look like once we open it up. Every project gets a written, line-item price before any work starts, so the parts cost and labor cost are shown separately and the bill matches the quote. A Delta cartridge on its own runs a small fraction of these totals; it’s the wall access and tile repair that move the number.

DIY or Call Us?

A homeowner can safely check a few things: shut off the water supply, photograph the model number behind the trim plate, tighten a loose handle screw, and wipe mineral crust off the escutcheon to see how far the corrosion goes. That’s where DIY usually goes wrong. Replacing a cartridge or opening a wall around a shower valve risks a hidden leak behind tile and a water-damaged subfloor if the seal isn’t set right, and on older valves the shutoff itself can stick open. If your valve body is corroded or the tile is already moving, this is a trained-professional job, not a weekend one.

Two construction workers carrying drywall panel in a residential home hallway in Enterprise, NV

For anything past the handle screw, call us at (844) 797-6157 for a free estimate. Our technicians have up to 22 years of experience, and we’ll tell you honestly whether you need a part swap or a fuller remodel.

FAQs

A remodeled family room with new windows and a window seat

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA finished backyard cottage with a small covered porchA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing roofline

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch