







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Enterprise Owner’s Guide
We install and replace ES Windows-compatible roofing components for Enterprise homeowners, and most roof repairs on these assemblies run $400 – $1,800 installed, with full roof replacement at $8,000 – $20,000. Small leaks and flashing failures tied to window-roof intersections are typically handled in a single scheduled visit. In Enterprise, most owners discover a problem the same way: a brown ring spreads across the ceiling below the window head, or granules start collecting in the gutter after a windy afternoon and the roof deck above the window frame feels soft underfoot.

That intersection where ES Windows products meet the roof line is the spot we get called about most. It’s also the spot most general roofers skip past, because it involves two trades at once: water management above and a window assembly below.
Key Takeaways
- Roof repairs on ES Windows-related failures in Enterprise: $400 – $1,800 installed.
- Full roof replacement where window flashing is integrated: $8,000 – $20,000.
- Leaks at window-roof intersections are usually flashing, not the window itself.
- We’re an independent service provider, not affiliated with ES Windows.
Which ES Windows Models This Applies To

ES Windows roofing assemblies turn up on a specific range of window products: fixed and casement units in the builder-grade series, sliding glass doors, and skylight components. The company’s product lines have shifted model numbers over the years, so the reliable way to match a part is by measuring, not by guessing. Pull the label from the window frame (usually on the head jamb or the side of the sash), note the series code, and measure the rough opening in inches. A part that’s 1/4 inch off in frame dimension will leak no matter how well you caulk it.
The OEM-versus-aftermarket decision matters more here than most people expect. Original ES Windows flashing kits and gaskets match the factory extrusion profile exactly, which matters in Enterprise’s heat. Aftermarket equivalents are cheaper and often just as good if they match the profile thickness and the metal gauge. When they don’t, you get a gap that opens up within a season. We’ll tell you plainly which way to go for your unit rather than defaulting to the pricier option.
On the interior side, we also work with KraftMaid cabinetry, Cambria, and Silestone surfaces for homeowners doing a full window-wall update at the same time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Roofing Is Failing
In Enterprise, these failures are common and each one points to a specific cause:
- Water staining on the ceiling or wall below the window head. Almost always flashing failure at the roof-to-window transition, not the window glass or frame itself. The flashing lifts or cracks and water tracks down behind the wall.
- Granule loss concentrated on the slope above the window. Sun exposure in Enterprise is intense, and the roof section over a window assembly often takes more reflected heat. Granules washing into gutters mean the shingles are past their service life there.
- Visible gaps or lifting at the step flashing where the roof meets the window. Thermal expansion cycles in the Nevada desert cause metal flashing to work loose over years. Once it separates, wind-driven rain gets behind it.
- Soft or spongy roof deck near the window. This signals moisture has already reached the sheathing. It needs to be addressed, not patched over.
- Drafts or daylight visible at the window-roof junction from inside. This means the seal between the window head and the roof assembly has failed and both the weather barrier and flashing need attention.
Replacement Cost & What’s Included

Our installed pricing for Enterprise roof repairs on ES Windows assemblies breaks down like this:
| Scope | Installed Price Range |
|---|---|
| Roof repair (flashing, localized shingles, seal) | $400 – $1,800 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation (if you’re upgrading) | $15,000 – $40,000 |
| Impact window installation (window side) | $8,000 – $25,000 |
| Window replacement (window side) | $4,500 – $15,000 |
What moves the price: roof pitch, how much sheathing has to be replaced, whether flashing needs a custom bend, and material choice. Every job gets a written price before we start, with parts and labor itemized. We don’t do verbal estimates that grow on the final invoice. All work is covered by our written guarantee, and if anything we install fails within a year of completion, we come back and make it right at no cost to you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Roof work is genuinely dangerous. A fall from a two-story roof causes serious injury, and Enterprise roof surfaces get hot enough to burn skin through a shirt in summer. Beyond the fall risk, flashing work is unforgiving: a repair that looks sealed but isn’t will leak again after the next rain, and by then the deck is wet and the repair cost has doubled. This is not a job we recommend for a homeowner on a ladder.
What you can safely do: check the interior ceiling for staining, look in the attic with a flashlight for damp sheathing or daylight, and note where water tracks. Take a photo from the ground of any visible gap. Then call us at (844) 797-6157. We’ll tell you over the phone whether what you’re describing sounds like a flashing issue or a full-roof problem, and we’ll give you a free estimate before anything starts.
FAQs

How long does ES Windows roofing last in Enterprise? A properly installed assembly with intact flashing lasts 15 – 25 years for asphalt shingles, but in Enterprise’s climate the sun exposure on the window-adjacent slope can shorten that. Check flashing every few years. Call (844) 797-6157 for a free inspection and exact quote.
Can the flashing be repaired, or does the whole roof need replacing? In most cases the flashing can be repaired without touching the full roof if the surrounding shingles are sound. A repair runs $400 – $1,800. If the deck is soft or the shingles are past 20 years, a partial or full replacement is the right call. We’ll tell you which honestly.
How long does the swap take? A localized flashing repair is usually a single visit, a few hours on site. A full roof replacement typically takes one to three days depending on the roof size and whether sheathing has to be replaced. Call (844) 797-6157 and we’ll give you a realistic timeline in your free estimate.
How do you source ES Windows-compatible parts? We match parts by measuring your existing window assembly against standard roof-to-window profiles, sourcing OEM where the profile demands it and quality aftermarket where it performs identically. We’re an independent provider, not affiliated with ES Windows. Our technicians have up to 22 years of experience with these assemblies. Every part is confirmed to fit before it goes on the roof.
Get a Written Price on Your Roof Repair
If you’re seeing ceiling stains, loose flashing, or granules in the gutter near your ES Windows units, the sooner it’s looked at, the smaller the repair. We’ll send a background-checked technician – you’ll get their name and photo before the visit – and you’ll have a written price before any work starts. Every project is backed by our 365-Day Done Right Promise. Call (844) 797-6157 for a free estimate on your Enterprise roof repair.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












