







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Enterprise Owner’s Guide
Bathroom remodeling in Enterprise typically runs $9,000 to $28,000 for a full gut-and-rebuild with IKO products specified into the scope, and most projects of that size are scheduled in phases rather than promised overnight. If you’re pricing a remodel around IKO materials, we install and finish those systems with a written price before any work begins, not a verbal estimate that grows on the final bill. The homeowner usually finds the problem the same way: a soft spot at the shower curb, cracked grout along the floor tile, or condensation behind the wall that never fully dries. By the time a bathroom reaches that point in Enterprise, the repair is rarely cosmetic.

Key Takeaways
- Full bathroom remodels with IKO products in Enterprise run $9,000 to $28,000, with smaller jobs in the $5,000 to $12,000 band.
- IKO systems are specified by series and product line, not by model number the way garage doors or appliances are, so the right “match” is a membrane and tile that meet the same spec.
- Nevada’s dry heat and hard water stress waterproofing and grout lines harder than the manufacturers’ coastal test data suggests.
- Mason Remodeling Enterprise is an independent service provider and is not affiliated with IKO.
Which IKO Models This Applies To

Here’s the compatibility gotcha most homeowners miss: IKO is a roofing and waterproofing manufacturer first, and its bathroom-relevant products are membranes, boards, and surface materials, not a numbered “model” you order by name. When you’re matching to IKO, you’re matching to a product family and a spec – waterproofing membrane thickness, backer board dimensions, and the tile or surface finish chosen to sit on top. Two bathrooms can both use IKO and share almost no parts. That means the label on the box matters less than the printed spec sheet, so bring the product codes you have and the room dimensions you can measure.
The OEM-versus-aftermarket question is real for IKO. Genuine IKO membranes and boards are worth specifying where the product is integral to the waterproofing – that’s not a place to save $40. For finish tile, grout, sealant, and vanity hardware, quality aftermarket equivalents perform just as well and often cost less. We source IKO-compatible materials through our supplier network and confirm spec before ordering. We don’t claim to keep parts on a truck or in a local warehouse; anything nonstandard is ordered and confirmed, and that’s part of the realistic timeline we’ll give you in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
In Enterprise, we see these five failures most often, and each one has a cause underneath it:
- Grout cracking in a repeating line along the floor or wall. Usually movement in the substrate, not bad grout. Hairline joints that keep opening after re-grouting point to a structural or backer-board problem.
- A soft or spongy shower curb or threshold. Water has been getting behind the waterproofing membrane for a while. By the time the curb feels soft, the framing behind it is often compromised.
- Peeling caulk at the tub or shower line, returning within weeks of re-caulking. The joint is wet, not the caulk. Recaulking over moisture traps it and makes the problem worse.
- Efflorescence – that white chalky powder – on tile or grout in a shower. Moisture is moving through the assembly and pushing salts to the surface. It’s a sign of water where it shouldn’t be.
- Condensation or dampness behind the wall, musty odor, or paint bubbling near the shower. Often a failing membrane or a missing vapor barrier. In dry Enterprise air, this one is easy to chalk up to climate, and that’s how it gets missed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Use these Enterprise ranges to self-qualify before you call. Every figure is parts-plus-labor and comes with a written line-item quote before work starts.
| Scope | Installed Range |
|---|---|
| Full bathroom remodel (IKO-spec waterproofing and finish) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
The range widens with the condition behind the tile. A straight replacement sits at the low end; hidden rot, a re-plumbed drain, or a layout change drives it up. We also specify KraftMaid, Cambria, and Silestone alongside IKO when the project calls for cabinetry and surfaces, so your finish and waterproofing are matched in one quote. Written guarantee terms on every project, with a free return visit if the installation fails.
DIY or Call Us?
There’s a real line here, and it’s honest. You can safely check: feel the curb and floor for softness, look for repeating grout cracks, and test whether a re-caulked joint fails again within a month. Those observations tell you whether water is getting where it shouldn’t. What goes wrong on DIY is the part behind the wall. Waterproofing membrane must be continuous and lapped to spec; one gap at a drain flange or a corner and you’ve rebuilt a bathroom that fails again in two years. Setting tile and sealing a shower correctly takes training, and a poorly sealed assembly is a slow, expensive failure, not an obvious one. The vanity swap is a genuinely reasonable DIY job. The waterproofing is not. If the curb is soft or the moisture is behind the wall, call (844) 797-6157 for a written estimate.
FAQs

Properly installed, expect 15 to 25 years from a membrane and tile assembly. Enterprise’s dry heat and hard water shorten that on the finish layer – grout and caulk need attention every few years – while the waterproofing underneath is what determines whether the room survives. Call (844) 797-6157 to talk through your situation; estimates are free.
Sometimes, yes. If the damage is limited to grout and caulk and the substrate is still firm, a repair can buy real time. If the curb is soft or moisture is behind the wall, a repair is a patch over the problem and will come back. We tell you which one you’re in after we see the room. Call (844) 797-6157 for a straight answer.
A shower or tub-to-shower replacement usually runs several days of on-site work once materials are confirmed; a full bathroom remodel runs two to four weeks depending on scope and inspection sign-offs. We don’t promise same-day timelines on planned remodeling, and we don’t quote a start date we can’t hold. Call (844) 797-6157 to schedule your free estimate.
We confirm the exact IKO product family and spec against your room and order through our supplier network, with materials checked before install. Anything nonstandard is ordered and confirmed in writing, not assumed to be on a shelf. A written price comes before any work starts. Call (844) 797-6157 to begin.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.
Ready to price your bathroom project? Call (844) 797-6157 for a free estimate. A live person answers every call, and you’ll get a written price before any work begins – backed by our 365-Day Done Right Promise.












