A Mason company - serving Enterprise, NV
An open living room and dining area after a whole-home remodel
Jerith · Enterprise

Jerith Windows & Doors in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Windows & Doors: The Enterprise Owner’s Guide

Jerith-compatible window and door replacement parts for Enterprise homes typically run $180 to $650 installed, depending on the piece, the series, and whether the repair touches one leaf or the whole unit. We match the part to your Jerith model, quote the price in writing before any work starts, and handle the swap for homeowners across Enterprise and the surrounding valley. Most owners find us the same way: a hinge starts grinding, a screen catches on the frame, or an operator stops seating flush after a windstorm, and the nearest big-box store doesn’t carry anything that fits. That’s where a Jerith-specific parts page earns its keep.

Professional contractors installing new hardwood flooring in a home renovation project in Enterprise, NV

Call (844) 797-6157

Which Jerith Models This Applies To

A remodeled primary suite with built-in wardrobes and a window seat

Jerith built its reputation on aluminum ornamental fencing, railings and gates, and its window and door hardware follows the same logic: cast and extruded aluminum components made to a small set of standard profiles rather than one universal fit. The parts we replace most on Enterprise properties are latches, hinges, closer arms, screen frames, operators and threshold pieces for the residential aluminum and vinyl-clad lines. Because the profiles changed incrementally over the years, matching is a measurement job, not a guess.

Before you order anything, find the identification label. On Jerith units it’s usually a small sticker on the jamb or inside the head frame, and it carries the series and a production code. Photograph it, then measure three things: leaf width, leaf height, and the backset (the distance from the door edge to the center of the handle). Those three numbers plus the label will tell us which part fits. Some older Jerith profiles are no longer produced, and in those cases we source a machined equivalent that matches the original mounting pattern rather than drilling new holes in your frame. On the OEM-versus-aftermarket question, the honest answer for Jerith is: use OEM where it exists, and a spec-matched aluminum equivalent where it doesn’t. What matters is alloy, finish and hole spacing, not the sticker on the bag.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Windows & Doors Is Failing

Replacement is usually the right call when you catch these early. Here’s what to look for and what’s actually going on:

  • The latch catches but doesn’t hold. The strike plate has worn oval or the latch tongue has rounded off. This is the single most common Jerith hardware failure we see, and it’s a security problem disguised as a minor annoyance.
  • The hinge squeaks, then sags. Aluminum hinges on Enterprise units take a beating from thermal cycling, and the pin or the knuckle wears before the leaf itself does. A sagging leaf that drags the threshold is usually a hinge that’s given up, not a frame that’s moved.
  • The operator turns but the window won’t open or seat. On casement and awning units, the operator arm or the sash gasket has failed. You’ll notice the window won’t close flush, which lets in desert dust and defeats the seal.
  • The screen frame is bent or the spline is shot. One hard bump and aluminum screen frames kink, and a kinked frame never seats flat again. Spline that’s dried out lets the mesh pull loose in the corners.
  • Water stains or daylight at the threshold or jamb. The threshold seal or weatherstrip has failed, which is a real problem in Enterprise given the monsoon-season driving rain we get against dust-hardened seals. Fix the seal before water reaches the framing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A low-threshold walk-in shower with a bench and grab bar

Here are realistic installed ranges for Jerith-compatible window and door work in Enterprise, parts and labor together:

  • Single latch, hinge or closer: $180 to $340
  • Screen frame and mesh rebuild: $120 to $260
  • Operator replacement (casement/awning): $220 to $450
  • Threshold and weatherstrip reseal: $160 to $380
  • Full window replacement, single unit: $450 to $1,200
  • Full window replacement, whole home: $4,500 to $15,000
  • Impact-rated window replacement: $8,000 to $25,000

What drives the range: the series, whether the part is still in production, whether the frame needs re-drilling, and how many units you’re doing at once. Every job gets a written price before a tool comes out, so there are no surprise invoices. Every install is backed by our written guarantee, and if a repair or installation fails, we come back at no charge.

DIY or Call Us?

Some of this is genuinely safe to handle yourself. You can photograph the ID label, measure the leaf and backset, check the weatherstrip for gaps, and swap a loose screen spline. Those are low-risk and worth doing before you call.

Where DIY goes wrong on Jerith units: drilling a new mounting pattern for an aftermarket latch, forcing a bent hinge pin, and prying a sash that’s bonded to its gasket. Aluminum frames don’t forgive over-torqued screws – once a hole strips, the next latch won’t hold either, and you’ve turned a $200 part into a frame replacement. If the leaf is sagging because the hinge is failing, or the latch won’t seat, that’s where you stop and call. We’ll tell you honestly whether it’s a repair or a swap. Call (844) 797-6157 for a free estimate.

FAQs

A walk-in pantry with wood shelving

How long do Jerith window and door parts last? Most Jerith latches and hinges hold up seven to twelve years in normal use, but in Enterprise’s dry heat and UV exposure, plastic and rubber components like spline and weatherstrip often dry out in four to six years. Metal parts outlast rubber every time.

Can my Jerith part be repaired instead of replaced? Sometimes, yes. A squeaking hinge can often be re-pinned, and a worn strike plate can be adjusted rather than replaced. If the aluminum is cracked or the mounting holes are stripped, replacement is the only honest answer. Call (844) 797-6157 and we’ll tell you which it is – estimates are free.

How long does the swap take? A single latch or hinge is typically a 30 to 60 minute visit. An operator or full window replacement takes two to four hours depending on the unit. We’ll give you a realistic window when we quote.

How do you source Jerith-compatible parts? We identify your model from the label and the measurements, then source OEM where it’s still made and a spec-matched aluminum equivalent where it isn’t. Mason Remodeling Enterprise is an independent service provider and isn’t affiliated with Jerith. We also work with KraftMaid, Cambria and Silestone on other parts of the home. Call (844) 797-6157 for a free estimate.

Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A second-story addition that matches the existing rooflineA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityA small remodeled galley kitchen with cabinets to the ceilingA powder room with botanical wallpaper and a stone sinkA remodeled kitchen with a waterfall island and wood cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch