







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Kohler Construction
Mason Remodeling Enterprise provides independent Kohler construction service in Enterprise, NV – diagnosing, repairing, and installing Kohler faucets, toilets, tubs, shower valves, and trim throughout the community. We’re not authorized, sponsored, or endorsed by Kohler; we’re an independent remodeler who works on the brand every week, which is why we can quote the fix your fixture actually needs instead of a dealer’s sales script. That independence matters most in Enterprise, where a 1990s tract home might hold an original Fairfax faucet and a 2000s addition with a Rite-Temp valve under the same roof. Call (844) 797-6157 to schedule a free estimate.

Why Trust Mason Remodeling Enterprise for Your Kohler Construction?

Our technicians have up to 22 years of experience, and a good share of that time has been spent with Kohler trim in hand. They know that a Forté shower handle that suddenly runs scalding-cold isn’t a mystery; it’s a pressure-balance cartridge that’s seized after years of mineral-laden water. They know the difference between a Fairfax ceramic-disc cartridge that drips and a valve body that’s actually failed – two problems that look identical from the sink.
That familiarity changes how we source parts. When your Kohler fixture is staying in place, we specify genuine Kohler OEM cartridges, valves, and trim, because aftermarket cartridges for Rite-Temp and ceramic-disc faucets are a common source of repeat leaks and temperature drift. We don’t keep Kohler parts on hand or claim to stock them locally; each job is quoted and the right component is sourced for that specific fixture and model.
Warranty-safe work is part of the deal. We use OEM components where the fixture is covered, document what was replaced, and tell you plainly what a manufacturer warranty will and won’t cover after a repair. Every crew member is verified through The Threshold Standard – background-checked, identity-verified, in a clean marked uniform, with a photo ID badge at the door and their name and photo sent to you before the visit. You’ll know who’s coming before they knock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Enterprise
Enterprise’s water is hard and mineral-heavy, and that reality shapes almost every Kohler failure we see here. These are the five that come up most.
- Seized Rite-Temp and pressure-balance valve cartridges. After years of scale buildup, a cartridge in a Forté or Purist shower valve sticks or seizes. You get sudden temperature swings, a shower that won’t get hot, or a handle that fights back. The cartridge is usually the culprit, not the valve body – but you only know for sure once the trim is off.
- Dripping Fairfax and Devonshire lavatory faucets. The ceramic discs inside these widespread faucets stiffen and drip at the spout as scale collects on the disc faces. A stiff handle that worsens over months is the early warning; the drip comes later.
- Chipped and rusting Villager and Bancroft cast-iron tubs. Porcelain enamel wears at the drain and overflow first, where water sits. Once rust breaks through at the drain, no resurfacing fully stops it – the enamel is gone, not just stained.
- Memoirs and Portrait toilets that run or won’t refill. Fill valves and flappers degrade, so the toilet runs constantly or never refills properly. On older slab installations, a failed wax ring at the flange can let water seep under the tile.
- Trim kits that look fine but hide a failing valve. A Forté or Purist trim can look perfect while the valve behind it drifts in temperature. Owners often call about the trim when the real problem is the cartridge behind it.
Kohler Parts & Our Repair-vs-Replace Approach

Parts sourcing for a Kohler fixture comes down to what’s staying and what’s going. If the fixture is staying in place, we specify genuine Kohler OEM cartridges, valves, and trim. Aftermarket cartridges for Rite-Temp and ceramic-disc faucets are a common source of repeat leaks and temperature drift, so saving a few dollars on a knockoff part usually costs more in callbacks.
The honest part is knowing when to stop chasing parts. When a valve body, cast-iron tub, or toilet is already failing structurally, we tell homeowners plainly that a Kohler replacement or a tub-to-shower conversion usually costs less over ten years than repeatedly repairing a fixture at the end of its life. That’s a math problem, not a sales pitch. We quote both paths in writing so you can see the numbers side by side.
Call (844) 797-6157 for a free estimate, and we’ll tell you which side of that line your fixture is on.
Our Kohler Service Process – Step by Step
Here’s how a typical Kohler job runs, from first call to warranty.
- 1
Diagnosis. We pull the trim and confirm whether the cartridge or the valve body is the real culprit. For a Fairfax faucet, that means checking the ceramic discs; for a shower, it means testing the pressure-balance valve under flow.
- 2
Line flush and repair or install. We flush the lines to clear mineral debris, then install the OEM Kohler cartridge or valve, or carry out the conversion or vanity install you’ve approved.
- 3
Test. We run temperature and pressure checks on the valve, confirm the faucet holds with no drip at the spout, and verify the toilet fills and stops cleanly.
- 4
Written scope and warranty. You get a written price before any work starts and a written guarantee with stated terms after – including a free return visit if a repair or installation fails.
A typical job starts with a Kohler Rite-Temp or pressure-balance shower valve that has lost temperature control, or a Fairfax lavatory faucet dripping at the spout after years of hard-water scale. A qualified local pro pulls the trim, confirms whether the cartridge or the valve body is the culprit, flushes the lines, and either installs an OEM Kohler cartridge or converts the alcove to a walk-in shower when the cast-iron tub enamel has rusted through at the drain. The homeowner gets a written scope before demolition, so the decision to repair versus convert is made with the wall open and the real condition visible.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Enterprise
We work on the Kohler lines Enterprise homeowners actually have in their homes: Fairfax and Devonshire widespread lavatory faucets, Memoirs and Portrait two-piece toilets in comfort-height and standard, Villager and Bancroft cast-iron alcove tubs, and Forté and Purist shower trim with Rite-Temp or pressure-balance valves. On the install side, our tub-to-shower conversions, walk-in shower installations, and bathroom vanity installs often pair a new Kohler fixture with the surrounding tile and trim. We quote each fixture for what it needs; we don’t claim to stock any of these lines, and parts are sourced per job.
We Also Service These Brands
Kohler is a big part of what we do, but it isn’t the only brand in your house. Mason Remodeling Enterprise also works with KraftMaid cabinetry, Cambria and Silestone surfaces, and Toto fixtures. That range means you’re not dependent on a single-brand shop – one crew can handle the Kohler valve, the KraftMaid cabinet run, and the Cambria countertop edge without handing you off to three different trades.
FAQs – Kohler Construction Service in Enterprise

No. We’re an independent Kohler service provider, and we are not authorized, sponsored, or endorsed by Kohler. We work on Kohler fixtures every week, which means we know the brand’s valve bodies, cast-iron and vitreous china bodies, and trim kits from the inside. That independence is exactly why we can recommend the repair or the replacement that fits your budget rather than a dealer’s inventory.
Yes, when the fixture is staying in place we specify genuine Kohler OEM cartridges, valves, and trim. Aftermarket cartridges for Rite-Temp and ceramic-disc faucets are a common source of repeat leaks and temperature drift, so we don’t risk your fixture on a knockoff part to save a few dollars. We source the right component for your specific model and quote it before we start. Call (844) 797-6157 for a free estimate.
Most single-fixture repairs, like a Rite-Temp cartridge swap or a Fairfax faucet repair, are finished in a single visit. A tub-to-shower conversion or a walk-in shower installation runs longer because it involves demolition, tile, and waterproofing. We give you a written scope and timeline before any work begins so there are no verbal estimates that grow on the final bill.
We cover Fairfax and Devonshire widespread lavatory faucets, Memoirs and Portrait two-piece toilets, Villager and Bancroft cast-iron alcove tubs, and Forté and Purist shower trim with Rite-Temp or pressure-balance valves. That covers most of what’s in Enterprise homes built from the late 1980s through the 2000s. If your model isn’t on this list, call us and we’ll tell you straight whether it’s a job we handle.
Not when the work is done correctly with OEM components. Using genuine Kohler parts and documenting what was replaced is the warranty-safe path. We’ll tell you plainly what a manufacturer warranty will and won’t cover after a repair, and we back our own work with a written guarantee and a free return visit if a repair or installation fails. Call (844) 797-6157 to talk through your situation.
Cost depends on the fixture and the scope. Here are the typical ranges we quote in Enterprise:
| Service | Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Call (844) 797-6157 for an exact quote – estimates are free.
Usually, yes. In most cases the cartridge has seized or scaled up and can be pulled and replaced through the existing trim opening without removing tile. The valve body itself is the question – if it’s failed, the scope changes. A pro confirms which it is before quoting. Call (844) 797-6157 for a free estimate.
If the chip is small and away from the drain, resurfacing can buy time. If rust has broken through at the drain or overflow, resurfacing won’t fully stop it, and a tub-to-shower conversion or walk-in shower install usually makes more sense over ten years. We quote both paths in writing so you can compare. Call (844) 797-6157 for a free estimate.
A failing fill valve or flapper is the usual cause – the valve doesn’t shut off cleanly or the flapper doesn’t seal, so water trickles into the bowl. On older slab installs, a worn wax ring at the flange can also be involved. Both are straightforward to diagnose and fix. Call (844) 797-6157 for a free estimate.
You don’t have to, but we strongly recommend it, and here’s why: aftermarket cartridges for Rite-Temp and ceramic-disc faucets are a common source of repeat leaks and temperature drift. OEM parts fit correctly and protect the fixture’s remaining life. We specify genuine Kohler parts when the fixture is staying in place. Call (844) 797-6157 to talk it through.
Scale has built up on the cartridge and the valve internals, which stiffens the handle and lets mineral debris reach the water. Enterprise’s hard water makes this common. Flushing the lines and installing an OEM cartridge usually restores smooth operation. Call (844) 797-6157 for a free estimate.
Book Your Kohler Service in Enterprise, NV
Whether it’s a dripping Fairfax faucet, a Rite-Temp valve that won’t hold temperature, or a Villager tub ready for a walk-in shower, Mason Remodeling Enterprise can diagnose it and quote the fix in writing before any work starts. Call (844) 797-6157 for a free estimate. Every project comes with a written price upfront and our 365-Day Done Right Promise.
Written by the team at Mason Remodeling Enterprise.












