







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Enterprise Owner’s Guide
KraftMaid bathroom cabinetry and vanities are built to last, but in Enterprise’s dry desert climate, the combination of low humidity and intense UV exposure through windows can cause wood components to shrink, crack, and fail years before their time. A full KraftMaid bathroom remodel in Enterprise typically ranges from $9,000 to $28,000, depending on the scope of cabinetry, surfaces, and fixtures involved. We install and service KraftMaid-compatible components, and our technicians are available to assess your failing vanity, cabinet box, or door front without delay.

Most homeowners in Enterprise discover a failing KraftMaid component in one of three ways: a soft spot at the bottom of the vanity cabinet, a door that no longer closes square, or a drawer that has begun to sag and scrape against the frame. These aren’t cosmetic issues. They are signals that the particleboard core, the hinges, or the drawer glides have reached the end of their service life in this climate.
Which KraftMaid Models This Applies To

KraftMaid produces bathroom cabinetry across several lines, including their Portrait, Passport, and Haven series, and while the joinery and finish vary between them, the failure points are remarkably consistent. The most common compatibility issue we see is homeowners ordering replacement doors or drawer fronts based on the color name alone, without verifying the door style and overlay. KraftMaid door styles have changed subtly over the years – a “Kensington” door from 2015 is not identical to a “Kensington” door from 2022. The label inside the cabinet door or on the back of the drawer box is your best friend: look for a five-digit model number, not just the finish name.
When it comes to OEM versus aftermarket, the decision is often economic. A genuine KraftMaid replacement door may run $150 to $400 depending on the style and size, while a custom aftermarket door in a matching finish might cost $90 to $250. For a single door, OEM makes sense. For a full vanity front replacement, an aftermarket equivalent from a vetted supplier can save you 30 to 40 percent. We source both paths and will show you the difference in writing before you commit.
One critical tip: measure the cabinet opening, not the old door. In Enterprise’s dry air, wood doors can swell and warp, so a door measured today may not match the true opening dimension. We measure the cabinet box itself to ensure a proper fit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Bathroom Remodeling Is Failing
Here are the five symptoms we see most often in Enterprise homes, and what each one usually means:
- Soft or crumbling cabinet floor: Water intrusion from the shower or sink has compromised the particleboard core. This is the most common failure in bathrooms with high humidity and poor ventilation.
- Doors that won’t stay closed or hang crooked: The hinges have stripped out of the cabinet frame, or the door has warped from moisture. In Enterprise, the low humidity can also cause doors to shrink and pull away from the hinge screws.
- Drawers that sag or stick: The drawer glides have worn out or the drawer box has swelled. This is especially common on vanity drawers that carry heavy toiletries.
- Peeling or bubbling finish: The factory finish has failed, often due to UV exposure through a bathroom window or poor ventilation causing moisture to sit on the surface.
- Loose or cracked face frame joints: The wood has dried out and the joinery has separated. This is a structural failure that will only get worse.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Enterprise homeowners, a bathroom remodel that includes KraftMaid cabinetry and replacement components typically falls into the $9,000 to $28,000 range. That range covers the full scope: removal of old cabinetry, installation of new KraftMaid-compatible vanities and storage, countertop installation (we also work with Cambria, Silestone, and Kohler fixtures), and finishing work. A smaller project focused only on a vanity replacement or door front swap might run $3,000 to $8,500.

Every project includes a written, line-item price before any work begins. That means you see the cost of the cabinetry, the installation labor, and the disposal fees separately. We back our work with a written guarantee for 365 days from the completion date, and we provide a free return visit if any installation issue arises within that period.
DIY or Call Us?
If the issue is a single loose hinge or a door that needs a minor adjustment, most homeowners can handle that safely with a screwdriver and a few minutes. But when the cabinet box itself has failed, the face frame has cracked, or the vanity needs to be removed and reset, DIY quickly becomes hazardous. A fully loaded bathroom vanity can weigh hundreds of pounds, and incorrect installation can lead to water damage, mold, or personal injury.
We recommend calling a professional for anything structural. Our technicians have up to 22 years of experience, and we’ll give you a written price before we touch a single tool. Call (844) 797-6157 to schedule a free estimate.
FAQs

With proper ventilation, a KraftMaid vanity should last 15 to 20 years. In Enterprise’s dry climate, you may see finish cracking or door warping closer to the 10-year mark if the bathroom lacks a quality exhaust fan. Call (844) 797-6157 for a free assessment of your current setup.
Sometimes, yes. A single door or drawer front can often be replaced without touching the cabinet box. But if the particleboard core has softened or the face frame has split, repair is not a durable option. Call (844) 797-6157 and we’ll tell you honestly which path makes sense.
A single vanity replacement is typically a one-day project. A full bathroom remodel with new cabinetry and surfaces usually takes three to five days. We’ll give you a firm timeline in your written estimate.
We source genuine KraftMaid components through approved suppliers and match aftermarket parts to your cabinet’s model number and finish. We never order based on a color name alone. Call (844) 797-6157 and have your cabinet label ready – we’ll confirm the exact part before you commit.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












