







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Enterprise Owner’s Guide
We install KraftMaid cabinetry and the parts that keep it working across Enterprise, and a full kitchen remodel here typically runs $14,000 – $45,000 installed, with cabinet-specific work landing in the $4,000 – $13,000 range. A door that no longer sits square, a drawer glides that grinds, or a cabinet face that’s swelling at the bottom edge is usually how Enterprise owners first figure out something underneath has failed, and those things tend to show up all at once rather than one at a time.

We’re an independent remodeling company. We’re not KraftMaid, and we don’t speak for the manufacturer. What we do is source compatible KraftMaid parts and put them in correctly.
Key Takeaways
- Most KraftMaid failures we see in Enterprise trace back to heat and dry air, not abuse.
- KraftMaid has used more than one hinge and glide platform over the years, so the part must be matched to your cabinet line, not just to the brand name.
- A single door or drawer fix is a small job. A full kitchen remodel is a scheduled project with a written price before any work starts.
- We hand you a written price before we touch the kitchen, and every project carries the 365-Day Done Right Promise.
Which KraftMaid Models This Applies To

KraftMaid has built cabinetry across a set of product lines sold mainly through home centers and design dealers, and the hardware inside those boxes has changed over the years. A door built in the mid-2000s may take a different hinge than one built in 2018, and the drawer glides on a tall pantry aren’t necessarily the same ones under a base cabinet. That’s the compatibility gotcha most Enterprise owners run into: they order a part that matches the brand and the color, then find it won’t seat because the mounting pattern belongs to a different generation of the cabinet.
To identify what you actually have, open the door and look for a label on the inside of the cabinet box, usually on the back wall or the inside of a side panel. Write down the model and any hardware code printed there, and measure the door width and the hinge cup bore if you can. A clear photo of the hinge, the glide, or the damaged face is worth more than a model number alone.
On the OEM-versus-aftermarket call: for hinges and glides, a quality aftermarket part from a known hardware maker often works as well or better than OEM and costs less. For door fronts, panels, and anything that has to match a finish, we stay as close to the original KraftMaid specification as possible, because a mismatched sheen on a nine-foot run of cabinets is obvious from across the room. We also coordinate Cambria and Silestone surfaces and Kohler fixtures when a cabinet change pulls the countertop with it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Doors that hang low or rub the frame. The hinge screws have pulled out of stripped wood or the hinge plate has fatigued. In Enterprise’s dry air, cabinet wood shrinks slightly through the summer, and screw holes that held tight in spring can loosen by August.
- A drawer that catches or won’t close flush. The glide is worn, or the cabinet box has racked out of square. Racking usually means the cabinet wasn’t anchored to the wall studs well enough, and it gets worse with a heavy drawer of pots.
- Swelling or bubbling at the bottom edge of the cabinet. Moisture from a slow sink or dishwasher leak has gotten into the particleboard core. This is the one failure that isn’t a parts swap; the cabinet box itself may need replacing.
- Finish peeling or checking near the range. Heat and grease break down the finish, and the low humidity we get here makes the wood under it move. Once the finish lifts, refinishing or a door replacement is the realistic fix.
- A cabinet face that has separated from the frame. The glue joint or the staples have let go. On an upper cabinet this is a safety issue as much as a cosmetic one, especially above a counter where people lean.
In Enterprise we regularly see that fifth one after a few years in homes with forced-air heat running hard through the winter. The cabinet dries, the joint opens, and the door starts carrying weight it was never meant to carry.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Enterprise, here’s what the work typically runs, installed, with parts and labor both in the number:
| Work | Installed Range |
|---|---|
| Cabinet installation (full run) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
What moves the number: how many cabinet boxes are being replaced versus repaired, whether the countertop has to come off and go back (it usually does when base cabinets change), and whether the layout is shifting. Hardware-only and single-door repairs sit well below the cabinet installation range, and we’ll tell you honestly when a fix is the better spend than a replacement.
You get a written price before any work begins. Not a verbal estimate that grows on the final invoice. And the work carries a written guarantee with the terms spelled out, including the 365-Day Done Right Promise: if it isn’t right within a year of completion, we make it right at no cost.
DIY or Call Us?
Some of this you can safely handle yourself. Tightening a loose hinge screw, swapping a drawer glide that matches the original exactly, replacing a single knob or pull: those are reasonable weekend jobs if you’ve confirmed the part fits. What goes wrong for owners is diagnosing the cause. People replace the same hinge three times before realizing the cabinet box is out of square, and that’s money spent on a symptom.
Two things we’d rather you didn’t tackle: anything involving an upper cabinet that has separated from its frame, since a loaded cabinet coming off the wall is a real injury risk, and anything that means disconnecting a gas line or working around live wiring behind the cabinets. Those need a trained professional, full stop.
Every crew member who comes to your door is background-checked and identity-verified under The Threshold Standard, and you’ll get their name and photo before the visit, plus a photo ID badge at the door. Call (844) 797-6157 and a live person answers, any hour. Estimates are free.
FAQs

Quality hinges and glides are commonly rated for tens of thousands of open-close cycles, which for a typical family is somewhere in the 10-to-15-year window, but Enterprise’s dry climate and heavy summer air-conditioning use tend to push that toward the shorter end. Wood movement loosens screws and racks boxes faster here than in a humid climate. If your cabinets are past that range and you’re seeing two or more of the symptoms above, call (844) 797-6157 for a free estimate on repair versus replacement.
Often, yes. A stripped screw hole can be filled and re-driven, and a hinge can be swapped for a compatible one without touching the door front. Repair stops being the smart call when the cabinet box has swelled from water or pulled apart at the joint, because the hardware was never the problem. We’ll tell you which side of that line you’re on before you spend anything.
A single hinge, glide, or door swap is usually a short visit, and a handful of them across one kitchen is typically a half day. If the fix pulls the countertop or replaces base cabinets, plan on a scheduled project measured in days, not hours, and you’ll have the timeline in writing before we start. Call (844) 797-6157 for an exact quote.
We match the part to the label inside your cabinet box and to measurements and photos of the existing hardware, not just to the KraftMaid name, because the hardware platform has changed across product generations. Where an OEM door front is the only thing that will match the finish, we go that route. Where a quality aftermarket hinge or glide will do the same job for less, we’ll say so.
If your kitchen in Enterprise needs cabinet work, a full remodel, or just an honest read on whether a part can be swapped or the box has to go, call (844) 797-6157 for a free estimate. You’ll get a live person, a written price before any work starts, and a crew whose name and photo you’ll have before they reach your door.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












