A Mason company - serving Enterprise, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Mighty Buildings · Enterprise

Mighty Buildings Windows & Doors in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A second-story addition that matches the existing roofline
A wide opening with a new beam where the kitchen wall was removed
A remodeled staircase with wood treads and a slim metal railing
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Windows & Doors: The Enterprise Owner’s Guide

We install Mighty Buildings-compatible windows and doors for Enterprise homeowners, with window replacement typically running $4,500 – $15,000 and impact window installation $8,000 – $25,000 depending on opening count and glazing. We don’t stock parts and we’re an independent service provider, not affiliated with Mighty Buildings, but our technicians (up to 22 years of experience) match your panel’s spec before we order. Most Enterprise owners notice the problem slowly: a door that won’t latch flush, condensation between panes, or a window seal that whistles when the desert wind picks up in the evening.

Professional contractor applying thin-set mortar to a kitchen backsplash for tiling. in Enterprise, NV

Call (844) 797-6157

Which Mighty Buildings Models This Applies To

A garage converted into a guest room and home office

Mighty Buildings built panelized homes, and window and door rough openings don’t follow the same dimensions as a stick-built house. That’s the first thing to understand before anyone orders a replacement. The opening is set by the panel, not by framing that a carpenter can shim to fit on the fly.

Start by finding the model and unit identifier on the panel label inside the home, usually near the electrical panel or on a mechanical chase cover. Match that to the opening schedule, not to what the old unit looks like. A window that measures 36 by 60 inches at the frame opening may need a specific sill depth and nailing fin offset to sit properly in a Mighty Buildings wall assembly.

When you can’t locate the label, we measure the rough opening ourselves, confirm the wall depth and finish return, and cross-check the glazing spec. Zoned climate here means solar heat gain matters more than most owners realize.

The OEM-versus-aftermarket decision is real. A factory-direct replacement gives you an exact match. A quality aftermarket unit from a national manufacturer often costs less and performs as well, provided the rough opening and water-shedding details line up. We quote both when both are available and tell you which one fits your Enterprise home’s actual opening. For other finish work in the same home, we also handle KraftMaid cabinetry, Cambria and Silestone surfaces.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Windows & Doors Is Failing

Each symptom points to a different root cause, and the fix differs. Here’s what we see in Enterprise most often:

  • Condensation trapped between the panes. The insulated glass seal has failed, letting moisture into the air gap. Once fogging starts, the unit won’t clear and the glass needs replacing or the whole sash does.
  • Drafts or whistling at the frame. Gaskets, weatherstrip, or the perimeter seal at the panel joint have opened up. Wind-driven dust here finds every gap, so a small leak shows up fast.
  • A door that won’t latch or drags on the threshold. The panel or frame has shifted slightly, often from thermal movement. The hinge side and latch side no longer align.
  • Water staining or soft spots at the interior sill. The exterior flashing or sill pan isn’t shedding water correctly. Left alone, this reaches the wall assembly.
  • Cracked glass or a broken lock and handle set. Impact damage or a hardware failure. Hardware is often the cheapest fix on the list and the most often delayed.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window replacement in Enterprise runs $4,500 – $15,000 installed. Impact window installation runs $8,000 – $25,000. A single door replacement sits within the lower end of the window range, while a full opening package climbs toward the top.

What drives the number: the number of openings, whether the unit is standard or impact-rated, the glazing spec, and how much finish work the interior return needs. A simple like-for-like sash swap is not the same job as a full unit replacement with new flashing and trim.

Professional contractor applying thin-set mortar to a kitchen backsplash for tiling. in Enterprise, NV

We give you a written price before any work starts, itemized so you can see parts and labor separately. No surprise invoices. Every installation is covered by our written guarantee for 365 days from the completion date, and if the installation fails, we return free of charge. Call (844) 797-6157 for a free estimate.

DIY or Call Us?

Some checks are safe and worth doing yourself. Run a hand along the frame on a windy day to feel for drafts. Wipe the interior sill after a rain to check for moisture. Look at the gasket around the sash and the weatherstrip at the door. Confirm the lock and handle operate smoothly. Those are observations, not repairs.

Where DIY goes wrong: removing and resetting a panelized window or door. The unit is set into a structural panel opening with specific flashing and seal details. Get the water-shedding wrong and you’re chasing a leak into the wall for years. Get the flashing wrong on an impact-rated unit and you’ve compromised the rating. Cracked glass is not a homeowner job either.

If the symptom is a failed seal, a draft at the panel joint, or a door that won’t latch, that’s a call. Reach us at (844) 797-6157 and we’ll schedule a free estimate.

FAQs

A framer checking new wall framing on a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wood double vanity with two mirrors after a bathroom remodelAn open living space after a whole-home remodelA remodeled primary bathroom with a soaking tub and walk-in showerA remodeled living room with built-in shelves around the fireplaceAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch