A Mason company - serving Enterprise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Enterprise

Moen Home Additions & ADU in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
An open kitchen and dining area after a remodel
A whole-home remodel with the living, dining and kitchen areas opened up
A second-story addition that matches the existing roofline
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Home Additions & ADU: The Enterprise Owner’s Guide

We install Moen-compatible fixtures and finish packages inside home additions and ADUs in Enterprise, and a finished addition runs $45,000 – $130,000 while a detached ADU runs $90,000 – $220,000 depending on size, foundation, and utility runs. When a Moen fixture or valve fails inside a new addition, it usually shows up as a slow drip at a shower valve, a cartridge that won’t hold temperature, or water staining at the base of a new vanity. Owners in Enterprise typically discover the problem months after the punch list is signed, when the guest bath finally gets daily use. We’re an independent service provider and not affiliated with Moen, so our job is matching the right part to your exact valve body and installing it correctly.

Professional contractor installing a kitchen countertop during a home remodel in Enterprise, NV

Call (844) 797-6157

Which Moen Models This Applies To

A tile setter installing wall tile in a shower

Moen parts are not universal. A 1222 cartridge fits the single-handle Posi-Temp tub and shower valves used in most residential builds, but the 1225 and 1200 series look nearly identical at a glance and won’t seat in the same body. Before we order anything, we pull the trim plate and read the stamped model number on the valve body itself, not the handle or the escutcheon, because trim gets swapped between series all the time. The same care applies to Moen kitchen faucets: the 1255 cartridge fits many single-handle models, but the pull-down and MotionSense lines use different internals entirely.

On a home addition or ADU in Enterprise, we’re usually working with builder-grade Moen valves in a new wet wall, and the model can shift between phases of a build. We document what’s actually installed in each bathroom so future service doesn’t start with guesswork. Kwik-Connect hoses on Moen pull-down faucets are a good example: the connector is convenient, but the O-ring inside it is a common leak point after a few years of hard water, and it’s a different part from the cartridge. If you want a fixture lineup coordinated across the addition, our material partners include KraftMaid, Cambria, and Silestone for the finishes, with Moen in the mix for plumbing trim.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Home Additions & ADU Is Failing

  • Drip from the tub spout or showerhead when the valve is off. A worn cartridge seat lets water bypass the seal. In Enterprise’s hard water, mineral scale accelerates that wear.
  • Handle feels stiff or won’t turn smoothly. Scale buildup on the cartridge stem is the usual cause. Left alone, it can snap the stem or damage the valve body.
  • Water temperature won’t hold steady. A failing pressure-balancing spool inside a Posi-Temp valve causes temperature swings. This is a safety issue in a home with kids or older adults.
  • Leak at the base of a new vanity faucet. Often a worn O-ring or a Kwik-Connect fitting that wasn’t fully seated during install.
  • Water staining on drywall below the shower valve. This points to a seal failure at the valve body, not the trim. It needs attention before the wall cavity is compromised.

The last symptom is the one we see most often on additions in Enterprise, because the new wet wall is behind fresh drywall and a slow leak hides until it stains.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A dining nook with a built-in banquette

Fixture and valve service inside an addition isn’t priced like a standalone bathroom remodel. Here’s what homeowners in Enterprise can expect for the plumbing side of the work:

  • Cartridge replacement (single valve): $180 – $320
  • Posi-Temp valve body replacement: $350 – $650
  • Shower or tub trim swap: $150 – $400
  • Vanity faucet replacement with supply connections: $200 – $450
  • Drywall access and repair behind a valve: $250 – $600

For a larger scope, a bathroom remodel runs $9,000 – $28,000 and a small bathroom remodel $5,000 – $12,000 in this market. What drives the range: whether the valve body needs to come out or just the cartridge, whether drywall has to be opened, and whether we’re matching exposed trim to the rest of the addition. We give a written price before any work starts, and parts and labor are itemized separately. A live person answers every call, day or night, so you’re not waiting until Monday to price a leak.

DIY or Call Us?

You can safely shut off the water supply, remove the handle and trim plate, and take a photo of the stamped model number on the valve body. That’s genuinely useful and we’ll help you read it. What we don’t recommend: pulling a Posi-Temp valve body out of the wall on your own if you’re not sure the supply is isolated at the right shutoff, or forcing a stiff cartridge, which can crack the valve and turn a $250 repair into an open-wall job. The bigger risk in an addition is the wall cavity itself: a leak you can’t see behind new drywall does more damage than the part ever cost. Call us at (844) 797-6157 and we’ll give you a written price for the swap.

FAQs

A home office with a built-in desk and shelves

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA built-in window seat in a bay windowA remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodelA finished backyard cottage with a small covered porch

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch