







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The Enterprise Owner’s Guide
We install and repair Mr-Glass-compatible windows and doors in Enterprise, and most full window replacements here run $4,500 – $15,000, while impact-rated installations run $8,000 – $25,000. A failed seal, a door that won’t latch, or a window that won’t stay up usually points to one worn component – a balance, a hinge, a weather seal, or a glazing unit. We’re an independent service provider, not affiliated with Mr-Glass, and we match the right part to your window or door before anything is ordered.

Most Enterprise owners discover the problem the same way: a window that drifts closed on its own, a patio door that scrapes the track, or fog between the panes that shows up after a summer of 105-degree afternoons. You notice it because the room feels different, the door won’t lock, or your energy bill creeps up. Our technicians have up to 22 years of experience reading exactly those clues. Call (844) 797-6157 and we’ll walk you through what’s likely failing before we ever schedule a visit.
Which Mr-Glass Models This Applies To

Mr-Glass covers several window and door lines, and the part you need depends on the series. Single-hung and double-hung windows use a spiral or block-and-tackle balance, and the balance is matched to the sash weight – swap in the wrong tension and the window either won’t stay up or slams down. Sliding patio doors use roller assemblies and a latch that varies by series. Casement windows use a crank operator and a hinge arm that wears at the pivot.
To identify your part, find the label on the window frame or the glass edge. It carries the series name and often a date code. If the label is gone, measure the visible glass and the sash height and width to the nearest sixteenth of an inch – Mr-Glass balances and rollers are sized by those dimensions, not by the model year alone. That’s the compatibility gotcha most owners miss: two windows from the same series can take different balance tensions because the glass packages differ.
On the OEM-versus-aftermarket question, we’re straight with you. For balances and rollers, a quality aftermarket equivalent often costs less and lasts as long, because the original supplier made them to the same spec. For a glazing unit or a specialty hinge on an older Mr-Glass line, an OEM match is sometimes the only way to get the fit right. We quote both paths and let you decide. The same sourcing standard applies to brands like KraftMaid, Cambria, and Silestone when a project crosses into adjacent work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Windows & Doors Is Failing
- The window won’t stay open. The balance has lost tension or the cord has snapped. A window that drops on its own is a balance problem, not a sash problem.
- Fog or condensation between the panes. The sealed glazing unit has leaked and the desiccant is spent. In Enterprise’s dry heat and monsoon humidity swings, seals fail faster than in milder climates.
- The patio door drags or won’t latch. A worn roller or a sagging track. Left alone, the drag stresses the frame and the latch misaligns further.
- Daylight or draft around the edges. The weather seal or sweep has hardened and pulled away. You’ll feel it most on windy spring days in Enterprise.
- The crank turns but the casement won’t open. The operator gear or hinge arm has stripped. Forcing it can bend the sash, so stop turning once it binds.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Enterprise owners actually pay, installed, with the part and labor together:
| Work | Installed range |
|---|---|
| Window replacement (full unit) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Single balance, roller, or seal swap | Quoted per part after inspection |
The range is driven by how many units, the series, whether the glass package is standard or impact-rated, and whether the opening needs reframing. We give you a written price before any work starts – every project, every time – so you see the part cost and the labor line separately. Every completed job carries a written guarantee with stated terms and a 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost. Call (844) 797-6157 for a free estimate.
DIY or Call Us?
Some checks are safe for an owner. You can confirm which window is failing, note the series from the label, measure the glass, and test whether a door roller is the culprit by lifting the panel slightly as it slides. Those details help us quote accurately.
Where DIY goes wrong is the repair itself. Window balances are under real spring tension, and a snapped spiral balance can whip loose and cut a hand – this is the one part on the window we tell Enterprise homeowners never to force. A mis-sized replacement balance also won’t hold, and you’ll be back where you started. We’d rather you inspect and let a technician do the swap. The Threshold Standard means the person at your door is background-checked and identity-verified, and you get their name and photo before the visit. Give us a call at (844) 797-6157 and we’ll take it from there.
FAQs

How long do Mr-Glass windows and doors last in Enterprise? A quality Mr-Glass window installed and sealed correctly typically lasts 20 to 30 years, but in Enterprise’s climate the glazing seal and weather stripping often need attention sooner – expect to replace seals every 8 to 12 years. Call (844) 797-6157 for an inspection and free estimate.
Can a failed part be repaired instead of replaced? Yes, often. A single balance, roller, or sweep can usually be swapped without replacing the whole window or door, which keeps the cost down. If the glass itself has fogged, the sealed unit needs replacing rather than repairing. Call (844) 797-6157 and we’ll tell you which path makes sense.
How long does the swap take? A single balance or roller swap is usually a short, same-visit job; a full window or door replacement takes longer and depends on the number of units and the opening. We give you a clear time estimate with the written price. Call (844) 797-6157 to schedule your free estimate.
How do you source the right Mr-Glass part? We identify your series from the frame label or precise measurements, then quote a quality aftermarket equivalent or an OEM match – whichever fits best and makes financial sense. You approve the part before we order. A live person answers every call, day or night, at (844) 797-6157.
When a Mr-Glass window or door in Enterprise stops working the way it should, the fastest way to a straight answer is a phone call. Tell us the symptom, get a written price before any work begins, and know the person coming to your door by name and photo. Call (844) 797-6157 for your free estimate.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












