







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Home Additions & ADU: The Enterprise Owner’s Guide
If you’re adding on to an Enterprise home, we build additions and ADUs specified around Owens Corning systems – roof decking and shingles, cavity insulation, and the weatherproofing layer that ties a new structure into an existing roofline. Home additions run $45,000 – $130,000 here, ADUs $90,000 – $220,000, and yes, a written price is delivered before any work begins. Most Enterprise owners don’t wake up thinking about this part. They discover something’s off when the new room won’t hold temperature in July, when a stain creeps across the ceiling from the tie-in, or when their contractor’s “Owens Corning-compatible” package turns out to be mismatched insulation R-values and an underlayment rated for a wetter zone.

Which Owens Corning Models This Applies To

Owens Corning doesn’t sell one “addition” – it sells a family of products that a well-built addition or ADU depends on. The most common in Enterprise: Duration and Oakridge shingle lines on the new roof, R-13 to R-21 insulation in the walls (R-30 to R-38 in the ceiling), and the ice-and-water shield and underlayment that go under the shingles. Owning a product here means owning the right match for the Nevada climate, not a single serial number.
To identify what you have or need, check three things: the shingle wrapper or the label on the original bundle (usually in the garage), the R-value printed on the insulation facing, and any spec sheet your contractor left with the permit packet. If a bundle label is gone, the shingle profile (the shape of the tab) and the granules are how we tell them apart. For a new addition, that decision is really an OEM-versus-aftermarket question. Owens Corning’s own systems are matched to each other – the shield, the underlayment, the shingle. A cheaper generic substitute often fits physically but not thermally, and in Enterprise that difference shows up fast. The materials we specify and install are Owens Corning roofing and insulation, and we’re an independent installer, not affiliated with the manufacturer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Home Additions & ADU Is Failing
- The addition can’t keep up with the AC. If the new room runs hot or cold while the rest of the house is fine, the cavity insulation is usually under-spec’d or was compressed during install. In Enterprise’s 105°F summer swings, a wall that should be R-21 installed at R-13 shows up on the energy bill by month two.
- Brown rings on the ceiling below the tie-in. That’s almost always the flashing and ice-and-water shield at the point where the new roof meets the old one. The shield wasn’t extended past the wall line, so monsoon rain backfills under the shingles.
- Granules in the downspout and on the patio. Shingles shed surface granules for the first year or so – normal. After that, shedding means the shingle is losing its UV protection early, often from a ventilation mistake in a new addition’s attic.
- Warm spot on the new exterior wall. Run your palm across it on a hot afternoon; a warm band tells you there’s a gap in the insulation or a missing piece at a stud bay. Very common when an addition shares a wall with the original house.
- Drafts at the junction between old and new. Air sealing at the seam is the step most often skipped. The two structures are built to different tolerances, and if the new framing isn’t taped and sealed to the old, every wind event in Enterprise finds the gap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For the Enterprise market, a full home addition runs $45,000 – $130,000 and an ADU $90,000 – $220,000. The Owens Corning portion – shingles, shield, underlayment, insulation – typically accounts for a defined slice of that number, and we break it out line by line so you see the material cost separate from labor.
What moves the range: square footage, whether the addition shares a wall with the existing house (tie-in work is the expensive part), ceiling height, and whether you’re building detached. What’s included: material matched to the Owens Corning system, installed to manufacturer spec, permits pulled and inspections passed, and a written price before any tool is unpacked. Workmanship is covered by a written guarantee for 365 days from completion. If a repair or installation fails in that year, we return at no charge.
DIY or Call Us?
An owner can safely do the checking. Walk the new space with a flashlight after a storm. Look for water stains under the tie-in. Feel the exterior wall for warm bands. Photograph what you find. That’s the diagnostic work, and it’s worth doing.

What you shouldn’t do is climb the new roofline to inspect or repair it yourself. A pitched roof on a new structure is a fall hazard even when it feels walkable, and getting the ice-and-water shield and flashing wrong costs another round of leakage. You also can’t fix a thermal problem by adding insulation over a compressed cavity – it just hides. Call us and we’ll tell you what’s actually happening before you spend on anything.
Every crew member who comes to a Mason Remodeling Enterprise project is background-checked and identity-verified, and you’ll receive their name and photo before the visit, plus a photo ID badge at the door. Call (844) 797-6157 to schedule your free estimate.
FAQs

How long does an Owens Corning roof last on a new Enterprise addition? A Duration shingle installed to spec typically lasts 25 to 30 years here, but the weak point is never the shingle – it’s the flashing at the tie-in and the attic ventilation. Done right, the system lasts. Done wrong, the shingle is fine and the ceiling leaks at year four.
Can a failing shingle be repaired instead of replaced? Often yes. A single damaged or lifted shingle can be repaired in a few hours if the roof is under ten years old and the underlying shield is intact. If the granules are gone across the slope or the tie-in is leaking, repair is a bandage. Call (844) 797-6157 and we’ll tell you which situation you’re in – estimates are free.
How long does a full addition take? A typical Enterprise home addition runs 3 to 6 months from permitted start to final inspection, and an ADU 5 to 8 months. The Owens Corning portion – roofing and insulation – goes in at the framing and dry-in stage, well before the finish work. You’ll have a schedule in writing.
How do you source Owens Corning material? Through professional-grade supplier relationships in the region, matched to your build spec. We don’t carry parts on a truck – the material for your addition is ordered to your project. Our technicians have up to 22 years of experience, and the same crew that specs it installs it.
We also work with KraftMaid cabinetry, Cambria and Silestone surfaces when your addition includes a kitchen or bath.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












