







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Enterprise Owner’s Guide
PGT bathroom remodeling in Enterprise typically runs $9,000 – $28,000 for a full bath and $5,000 – $12,000 for a smaller bathroom, and every project starts with a written price before a single tool is unpacked. These aren’t same-day swaps, and we won’t pretend otherwise. A finished bathroom takes real scheduling, real permits, and real drying time. The number we quote on the first visit is the number on the final bill.

Most Enterprise homeowners don’t start by shopping for a remodel. They start with a symptom. A vanity that’s pulled loose from the drywall behind it. Tile grout near the shower pan that keeps coming back grey no matter how often it’s scrubbed. A PGT tub-to-shower conversion drawing that never got installed right the first time, or a factory bath surround from a PGT unit that was framed to the wrong rough opening. The bathroom stops behaving like a bathroom, and the owner calls to find out what a proper fix actually costs.
Key takeaways:
- Full bathroom remodel in Enterprise: $9,000 – $28,000 installed.
- Small bathroom remodel: $5,000 – $12,000 installed.
- Written price before any work begins, on every project.
- 365-Day Done Right Promise on the finished work.
- We’re an independent service provider, not affiliated with PGT.
Which PGT Models This Applies To

PGT ships bathroom-relevant product through a few different channels, and the part number your project needs depends entirely on which line your builder used. The most common in Enterprise homes is the PGT WinGuard and PGT Winguard Vinyl series used in newer production builds because of the wind-load requirements in Clark County. If your bathroom has PGT windows or a sliding bath window as part of the assembly, we’re matching against that window’s label and model code. If your project involves a PGT bath door or shower enclosure from PGT’s door division, the model line and glass spec are printed on a manufacturer’s label on the frame edge, not on the glass itself.
Here’s where Enterprise owners get tripped up. PGT part compatibility is not interchangeable across series. A Winguard Vinyl window assembly to a shower wall uses different mounting hardware and weather stripping than a PGT aluminum-series unit. The glazing bead, the weep system, and the interior trim all differ. Measuring the opening and matching to a part number you pull off a sticker is the only reliable way to order the correct component, and we’ve seen more failed Enterprise remodels from a “close enough” part than from anything else. For the broader surface and fixtures side of the PGT bath remodel, we work with KraftMaid, Cambria, and Silestone as our spec-grade partners, and we treat those the same way: exact model, exact part, exact fit.
The OEM-versus-aftermarket decision for PGT specifically comes down to the part. For structural or glass-holding components, we specify OEM or a PGT-approved equivalent, full stop. For trim, weather stripping, and non-structural fasteners, a quality aftermarket equivalent often represents real savings with no compromise on lifespan. We’ll tell you which is which on the quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Bathroom Remodeling Is Failing
- Water pooling at the base of the shower. That’s a failed pan liner or a slope that was never set right. In Enterprise’s dry desert heat, the shower floor expands during the day and contracts at night, and any crack in the liner gets worked open faster than in a humid climate. Left alone, that water finds the subfloor.
- Tile grout that keeps cracking in the same line. A moving substrate behind the tile, usually a backer board installed without the proper screw pattern or a PGT tub surround that was framed to the wrong dimension. Desert temperature swings across the tile surface accelerate the problem on exterior bathroom walls.
- A vanity pulling away from the wall. Water intrusion at the vanity backsplash or a cabinet not anchored into studs. The drywall behind a PGT bath window that was set without proper flashing is a common culprit in Enterprise because of how much sun exposure that wall gets on the west side of the house.
- Fogged or failed dual-pane bathroom windows. Seal failure in the insulated glass unit. PGT windows in Enterprise see UV loads that shorten the seal life compared with coastal installs, and a bathroom window that fogs at the edges first is telling you the U-value is gone.
- A shower door that won’t close flat or scrapes the frame. A dropped hinge, or the whole enclosure went out of plumb when the tile was set. Common when a PGT bath door was installed against a wall the original builder never shimmed true.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed bathroom remodeling in Enterprise runs $9,000 – $28,000 full-spec, and small bathroom work runs $5,000 – $12,000. If your project narrows to a specific fixture or part, here’s what the individual scope looks like:

| Scope | Installed Range |
|---|---|
| Full Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the range? The PGT component replacement itself (a glass unit or an entire bath window assembly runs the high end), the substrate repair that has to happen once the old assembly comes out, and how far the existing plumbing and electrical have to move. Our written price lists the part, the labor, and the ancillary repair by line item. You’ll see the parts markup and the labor rate separately. Every project carries our 365-Day Done Right Promise. If the work fails within 365 days of the completion date, we return at no charge.
DIY or Call Us?
Here’s where the honest split is. You can safely check a bathroom window for a failed seal by holding a lighter to the inside pane; if the flame flickers, the seal is gone. You can check a bathroom vanity for anchoring by leaning on the corner and feeling for movement. Both of those are free and tell you whether you’re looking at a cosmetic issue or the start of a real repair.
What you should not do on your own: pull the trim around a PGT bath window to re-flash it. That’s an exterior-wall penetration, and if the flashing isn’t set right, Enterprise’s summer heat and intermittent monsoon moisture will find that gap and turn a window seal into a drywall and framing repair. Same with a shower pan or tub surround: the waterproofing behind the tile is a system, not a product, and a single missed layer means the whole thing has to come out. If your PGT bathroom assembly has a failed window seal, a loose vanity, or a shower pan that’s pooling, that’s the moment to call.
Call (844) 797-6157 to schedule a free estimate. A live person answers every call, every day of the year, including weekends and holidays. You’ll get a name and a photo of the technician assigned to your visit before they arrive, a clean uniform at the door, and a photo ID badge on arrival.
FAQs

A properly installed PGT bathroom assembly in Enterprise generally lasts 15 to 25 years in a climate where the sun and the dry heat do most of the damage, and the window-assembly seal life typically runs toward the lower end because of UV. The glass unit is the first thing to go on an exterior bathroom window. Interior shower and tub assemblies lean toward the longer end of that range if the waterproofing was done correctly. The single biggest lifespan factor is whether the original install was sealed right, not whether a PGT-approved part was used. Call (844) 797-6157 for a specific lifespan estimate on your bathroom – free.
Sometimes. A failed sealed glass unit in a PGT window can often be replaced without replacing the whole window if the frame is sound. A vanity that’s pulled loose from the wall can sometimes be re-anchored, but only if the drywall behind it hasn’t taken on water. A shower pan that’s leaking almost always requires the pan to come out, because the failure is beneath the tile. The free estimate visit is where we determine which side of that line you’re on, and we tell you plainly before any work is authorized. Call (844) 797-6157 and we’ll walk through it.
A full remodel in Enterprise runs 3 to 5 weeks for most bathrooms; a small bathroom or a single fixture scope runs 1 to 2 weeks. The PGT window or glass component on the assembly is often the long-lead item, which is why we confirm the part number and order it before demo starts. Tub-to-shower conversions sit in the 2 to 3 week range if the plumbing stack doesn’t need to move. Every timeline goes in the written price so you’re not chasing the crew for a schedule update mid-project. Call (844) 797-6157 to get a realistic start date for your bathroom – the estimate is free.
We pull the model and series code from the label on your existing PGT window or door frame, verify it against the PGT compatibility chart for that series, and order the exact part. We do not claim to keep PGT parts on hand or carry PGT stock, so if the part isn’t in a local distributor’s inventory, we tell you the lead time up front and put it in writing. For fixtures and surfaces, we spec from KraftMaid, Cambria, and Silestone, and we treat those the same way: exact model, exact part. If your window is an aluminum series, don’t let anyone sell you vinyl-series hardware. Call (844) 797-6157 and we’ll confirm the part before we quote.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












