







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Fence Installation: The Enterprise Owner’s Guide
Sakrete fence installation in Enterprise, NV typically runs $3,500 – $9,000 installed for a standard residential run, with the exact figure set by linear footage, footing depth, and gate count. We set posts in Sakrete high-strength concrete mix, square and brace every panel, and back the finished work with a written guarantee. Most owners land here after finding a footing that has cracked loose, a wobbly post, or a hairline split running up the concrete collar at the base of the fence line.

Fence installation here means digging and setting posts the right way, then hanging the fence so it stays plumb through our summer heat and monsoon wind. Sakrete is the concrete brand most homeowners recognize from the orange bag, and it’s what we reach for when a post footing needs to cure fast and hold hard in our caliche-heavy soil. If you’ve got a bag in the garage and a leaning fence in the yard, this guide is for you.
Key Takeaways
- Installed Sakrete-based fence projects in Enterprise usually fall between $3,500 and $9,000.
- Footing failure, not the fence boards, is what brings most owners to this page.
- Post cure time and footing depth are the two specs that decide whether the fence lasts.
- We’re an independent service provider and are not affiliated with Sakrete.
Which Sakrete Models This Applies To

Sakrete is a concrete and mortar brand, not a fence manufacturer. The bag you’re holding is one of their post-setting mixes: Fast-Setting Concrete (the 50 lb bag that sets in about 20 to 40 minutes and needs no mixing in the hole), High-Strength Concrete Mix (the 80 lb bag rated around 4,000 psi that you mix in a tub or wheelbarrow), or a post-hole mix sold for deck and fence work. Match the part to the line you’re reading off the bag before you buy anything.
Read the label closely. The bag prints a yield in cubic feet per bag, and that number, not the weight, tells you how many footings a single bag covers. A 50 lb fast-set bag pours roughly one 8-inch hole about 2 to 3 feet deep. An 80 lb high-strength bag pours slightly more but takes water and mixing. Line up the yield against your actual hole diameter and depth and you’ll know the part is right before you load up.
OEM vs. aftermarket for Sakrete
Sakrete is a commodity concrete brand, so the “OEM vs. aftermarket” question flips here. There’s no proprietary connector or proprietary part to chase. What matters is the mix rating and the cure time. A 4,000 psi high-strength mix and a fast-set mix are both legitimate; they just solve different problems. We’ll spec fast-set in Enterprise when we need a post solid enough to hang a gate the same day, and high-strength when a corner post carries extra load. Premium cabinetry and surfaces brands like KraftMaid, Cambria, and Silestone live in our remodel work, but for a fence footing the spec is Sakrete and the numbers on the bag.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Fence Installation Is Failing
Owners usually notice the problem from the street before they see it up close. Here’s what a failing Sakrete footing or fence install looks like and why it happens.
- A post that rocks when you push it. The concrete collar has separated from the soil or the post, so the footing is no longer gripping. In Enterprise this often traces to a hole dug too shallow for our expanding clay.
- A hairline crack up the concrete base. Fast-set mix poured too dry or cured in a hurry will crack. Once water gets into that crack and freezes or expands in summer heat, the collar splits further.
- Fence panels leaning out of plumb. A footing that cured soft lets the whole run tip. Wind load across a long panel is enough to walk a loose post out of line over a season.
- Rust staining or wood rot at the post base. Concrete poured above the post’s base line traps moisture and rots the wood or corrodes the metal. The footing looks fine while the post inside it is failing.
- Heaving or sinking along the fence line. Our soil swells and shrinks with the seasons, and a footing set without enough depth will lift or drop with it. You’ll see the fence hump and dip at the post points.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Enterprise, a Sakrete-based fence installation project generally prices out between $3,500 and $9,000. That lead range covers typical residential work. Here’s what moves the number up or down.

| Line item | What it covers | Price range |
|---|---|---|
| Footings only | Re-set failed posts on Sakrete mix, level and brace | $350 – $1,200 |
| Full vinyl fence install | Posts, Sakrete footing, panels, hardware | $3,500 – $9,000 |
| Full aluminum fence install | Posts, Sakrete footing, panels, hardware | $4,000 – $10,000 |
| Gate addition | Heavier corner footing, gate hardware, hang and align | $400 – $1,500 |
The range is driven by three things: how many linear feet you’re running, how deep the footings have to go to clear our frost line and clay, and how many gates you need. We itemize the Sakrete product, the footing labor, and the fence materials separately so you can see the split between parts and work. Before any tool comes out you get a written price in hand, and every finished install carries the 365-Day Done Right Promise. If something we set or hung fails within a year of completion, we come back and make it right at no cost.
DIY or Call Us?
There’s a fair amount you can check safely yourself. Look at footage count, confirm your post spacing, read the yield on the Sakrete bag, and test whether a post moves when you lean on it. If a single gate post has gone soft and the rest of the fence is solid, a footing reset can be a manageable weekend job for someone who’s set posts before.
Where DIY goes wrong is the footing itself. A hole that’s too shallow, mix poured too dry, or a post set without bracing will crack or walk out within a season in Enterprise. Dig a hole and hit caliche and the whole plan changes. Hitting an unseen utility line is the other risk, so always call 811 before you dig. We handle the depth math, the bracing, and the Sakrete pour, and we leave the fence plumb and squared. Call (844) 797-6157 and we’ll quote the job before you buy a single bag.
FAQs

Set correctly with proper footing depth, a Sakrete-based fence install should hold 15 to 20 years or more, though post material and our summer heat shorten that if the footing isn’t deep enough. The concrete outlasts the fence; the post and foot depth are what you’re really protecting. Call (844) 797-6157 for an exact quote on re-setting a soft footing – estimates are free.
Often yes. A single rocking or cracked post footing can usually be dug out and re-poured with fresh Sakrete mix without touching the rest of the fence. If the panels have shifted out of line across several posts, a full reset makes more sense. Call (844) 797-6157 and we’ll tell you which side of that line your fence is on.
A single footing reset typically takes half a day to a day including cure and re-hang, while a full fence line runs one to several days depending on footage and set time. Fast-setting Sakrete shortens the wait, but the fence still needs to be braced while the mix cures. Call (844) 797-6157 to schedule your free estimate.
We spec the mix to the job: fast-setting for posts we need to hang quickly and high-strength for corner and gate posts that carry load. We buy the right rating for each footing rather than the cheapest bag on the shelf, and it shows up in your written line-item pricing. Call (844) 797-6157 and we’ll put the numbers together for your fence.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












