A Mason company - serving Enterprise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Enterprise

Schluter Windows & Doors in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A finished backyard cottage with a small covered porch
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Windows & Doors: The Enterprise Owner’s Guide

We install Schluter-compatible windows and doors in Enterprise, and most replacement or repair work lands between $4,500 and $15,000 for standard window replacement, with impact window installation running $8,000 to $25,000. We can usually get a technician out to assess the failing part within a day or two of your call. You’ll know something’s wrong before you see a gap: the sash drags against the frame, the door catches on the threshold, or you notice a fine crack running along the trim where the Schluter profile meets the wall. In Enterprise, that crack is often the first visible sign, because the desert temperature swings work the joint harder than most homeowners expect.

Contractors performing professional bathroom vanity and mirror installation in Enterprise, NV

Call (844) 797-6157

Mason Remodeling Enterprise is an independent service provider. We are not affiliated with Schluter.

Key Takeaways:

  • Most Schluter window and door failures in Enterprise start at the perimeter seal, not the glass.
  • Standard window replacement: $4,500 – $15,000. Impact windows: $8,000 – $25,000.
  • We give you a written price before any work starts.
  • Every job is backed by the 365-Day Done Right Promise.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter systems show up in windows and doors most often as trim and transition profiles – the metal or PVC strips that seal the edge where the window or door frame meets tile, flooring, or exterior cladding. The profiles themselves are simple. The compatibility question is whether the replacement profile matches the thickness and depth of your existing assembly, and that’s where most homeowners get stuck.

Here’s what to look for before you call anyone:

  • Profile depth: Schluter trim profiles are sized to the thickness of the tile or substrate they’re set against. A profile made for 3/8-inch tile won’t seat correctly against 1/2-inch material, and you’ll get a gap that lets water in.
  • The label: Look for the stamped profile code on the metal itself, usually printed along the back or on the packaging if you still have it. That code tells us exactly which profile family you have.
  • Photo documentation: Take a photo of the profile in place and a close-up of the stamped code. That’s usually enough for us to match the part without a second visit.

On the OEM versus aftermarket question: Schluter’s own replacement profiles are the safe match, and we source them through authorized channels when the exact part is still in production. Quality aftermarket equivalents exist and can work, but the tolerances on the PVC and anodized aluminum finishes vary enough that we won’t install one unless the dimensions are verified against the original. A close-but-not-quite profile will fail at the seal, and that failure shows up within a season in Enterprise’s heat.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Windows & Doors Is Failing

Five symptoms we see regularly in Enterprise, and what’s actually going on underneath each one:

  • Water staining or softness along the interior sill. The perimeter seal has broken down, and moisture is getting behind the trim profile. This is the most common failure we find, and it usually starts at the bottom corners where water pools.
  • A visible gap between the profile and the frame or substrate. The profile has shrunk, shifted, or pulled loose from its setting bed. Once the gap opens, wind-driven dust and rain get in, and the problem accelerates.
  • Cracking or chalking on the profile surface. UV exposure in Enterprise is brutal on PVC and finish coatings. When the surface chalks, the material is breaking down and losing its seal.
  • The window or door binds or drags. This usually means the frame has shifted or the profile is interfering with the sash travel. It’s often a sign the assembly wasn’t set to the right depth in the first place.
  • Drafts or heat infiltration around the perimeter. The profile isn’t sealing against the frame anymore. In summer, you’ll feel warm air pushing in around the edges even when the window is closed.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A built-in window seat in a bay window

Here’s what window and door work runs in Enterprise, so you can price it before you pick up the phone:

Work Installed Price Range
Standard window replacement $4,500 – $15,000
Impact window installation $8,000 – $25,000
Profile and trim repair (per window or door) Quoted per opening

What drives the range: the number of openings, the size and type of window, whether the frame itself needs work or just the profile, and whether you’re moving to impact-rated glass. A single failed profile on one window is a modest repair. A whole-house window replacement with impact glass sits at the top of the range.

We give you a written price before any work begins, with parts and labor broken out, so you can see exactly what the profile costs versus the install. Every job is covered by the 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you. If a repair or installation fails, we come back free, no dispute process.

DIY or Call Us?

Some checks are safe to do yourself. You can photograph the profile, note the stamped code, feel for drafts around the perimeter, and look for water staining on the interior sill. That information helps us match the part before we arrive, and it’s genuinely useful.

Where DIY goes wrong: removing and reseating a window or door profile means working with the frame assembly, and if the frame itself has shifted or the glass is involved, a bad reseat can crack the unit or leave a leak that’s worse than what you started with. On impact-rated assemblies, the frame and glass are a sealed system, and pulling the trim can compromise that seal. We’d rather you call than chase a leak you created. For a free estimate, call (844) 797-6157. A live person answers every call, 24 hours a day, seven days a week.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA remodeled family room with new windows and a window seatA wide opening with a new beam where the kitchen wall was removed

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch