A Mason company - serving Enterprise, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Silestone · Enterprise

Silestone Driveway & Pavers in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled staircase with wood treads and a slim metal railing
A low-threshold walk-in shower with a bench and grab bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Silestone Driveway & Pavers: The Enterprise Owner’s Guide

We install and replace Silestone-adjacent hardscape systems for driveways and paver areas in Enterprise, and a full paver driveway installation typically runs $7,000 – $18,000; a sealing or repair visit lands far lower, around $250 – $700. We can usually get an estimator to your door within a few days, and you’ll have a written price before anyone lifts a tool.

Two construction workers framing a doorway during bathroom remodeling in Enterprise, NV

Call (844) 797-6157

Most Enterprise owners don’t discover a problem with their paver or hardscape system at the moment it fails. They notice it weeks later: a paver that rocks underfoot when they pull in, a joint that keeps sanding out onto the concrete apron, a hairline crack in the surface that fills with dust after every wind event. Then a neighbor asks about it, and suddenly the driveway is something you’re pricing instead of something you ignore.

Key Takeaways

  • A standard paver driveway install in Enterprise runs $7,000 – $18,000, depending on square footage, base prep, and paver choice.
  • Silestone surfacing is a quartz product, not a paver brand. For driveways and paver work we match you with specification-grade hardscape lines like Belgard, Unilock, and Techo-Bloc, and we finish surfaces with the same quartz-family care.
  • Enterprise heat and monsoon cycles are the two biggest enemies of a paver joint – both are addressable with proper base and sealing.
  • You get a written price before work starts, background-checked technicians introduced by name and photo, and the 365-Day Done Right Promise.

Which Silestone Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Here’s the honest compatibility picture. Silestone is a quartz surfacing brand made by Cosentino – it’s the material you see on counters, vanities, and sometimes outdoor bar tops and cladding details. It is not a paver line, and no Silestone quartz product is sold as a driveway paver. So “Silestone driveway & pavers” in practice means one of two things: you have Silestone quartz used as a decorative surface element near a driveway or patio (an entry pillar cap, a planter wall top, a bar top facing the driveway), or you’re sourcing hardscape around a Silestone project – matching a paver field to the color and finish of your Silestone surfaces.

If you’re identifying a part, look for the etched product label on the underside of any quartz component, or the invoice line showing the series name (Silestone lines include Calacatta Gold, White Zeus, Eternal, and Desert Silver, among others). The series name matters for color-matched replacement, not for structural fit. For the actual paver field, the specification that matters is paver size (common sizes run 60 mm and 80 mm thick for driveways, 4×8 inch to 12×12 inch face), the base depth (6 to 8 inches of compacted aggregate base for vehicle traffic), and the joint sand type (polymer sand for driveways, not regular sand). Aftermarket paver systems that meet ASTM C936 standards are functionally equivalent to OEM hardscape brands. We’re an independent service provider – not affiliated with Silestone or Cosentino – so we advise on fit and finish, and we install specification-grade lines including Belgard, Unilock, and Techo-Bloc.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Silestone Driveway & Pavers Is Failing

  • Paver rocking underfoot. The base under that paver has lost compaction, usually because water got beneath the surface. In Enterprise, monsoon runoff concentrating at a low corner is the usual culprit.
  • Joint sand washing out. Polymer joint sand degrades under UV and repeated wet-dry cycling. Enterprise summers with 100-degree-plus days and winter cold snaps accelerate that cycle, and once a joint opens, the next rain takes more.
  • Efflorescence – the white chalky bloom. That’s salt migrating to the surface through moisture from below. It’s telling you water is moving through the pavers instead of draining away.
  • Hairline cracks in quartz components near the driveway. Silestone quartz used outdoors in a pillar cap or bar top can crack if the substrate shifts or if it wasn’t set on a properly isolation-membraned base. Enterprise’s freeze-thaw swings on winter nights stress any rigid surface.
  • Sunken or heaved sections along the apron. This is the driveway-to-street transition. If pavers are sinking there, the soil was under-prepped or the edge restraint has failed, and it will only get worse with traffic.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A whole-home remodel with the living, dining and kitchen areas opened up

For Enterprise, paver driveway installation runs $7,000 – $18,000. A driveway replacement (removing and resetting the full field) runs $5,000 – $14,000. Driveway sealing alone is $250 – $700. If quartz components like a pillar cap or bar top need to be remade and set, plan on a small fabrication and set cost within a countertop installation range of $2,000 – $6,500 depending on size.

What drives the range: total square footage, base depth required (Enterprise soils vary from caliche to sandy loam – caliche needs more excavation), paver choice (a standard concrete paver sits at the low end; a premium tumbled or large-format unit sits higher), edge restraints, and drainage work.

Every project comes with a written price before we start – a line-item quote, not a verbal estimate. Parts and labor are shown separately so you can see what you’re paying for. The work is covered by the 365-Day Done Right Promise: if anything we installed fails within 365 days of completion, we come back and make it right at no cost to you.

DIY or Call Us?

You can safely inspect your pavers and quartz components yourself. Walk the field on a dry day and mark any hollow-sounding paver with chalk. Check the joints for gaps deeper than a quarter inch. Look for efflorescence or water pooling after a rain. Photograph anything that looks cracked on the quartz pieces. None of that requires tools.

What you shouldn’t try yourself: resetting a paver field over a failed base, cutting or fabricating quartz components (silica dust from cutting quartz is a documented respiratory hazard), or lifting a heavy stone or paver alone. Paver installs are also more physically demanding than most homeowners expect – an 80 mm paver weighs about 30 pounds, and you’ll move hundreds of them. If you’ve got a failing paver section or a quartz component that cracked, call us at (844) 797-6157 to schedule a free estimate. You’ll get a written price, and you’ll know before we arrive who’s coming – name, photo, and badge at the door under The Threshold Standard.

FAQs

A second-story addition that matches the existing roofline

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A wide opening with a new beam where the kitchen wall was removedA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeA finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sink

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch