







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Enterprise Owner’s Guide
We install Unilock-compatible driveway and paver systems in Enterprise at an installed cost of $7,000 to $18,000 for a full driveway and $3,500 to $11,000 for a patio, and we give you a written price before any work starts. Most Enterprise owners don’t decide to replace pavers on a whim. They notice the first joint sand washing out after a monsoon, a corner paver rocking underfoot near the garage apron, or a hairline crack spreading across a Unilock Brussels Block that was perfectly tight two summers ago. Once water gets under the bedding layer, the failure tends to run faster than people expect in our heat.

Key Takeaways
- Unilock pavers sold in Southern Nevada are typically 60mm or 80mm thick; getting the thickness wrong against your existing field is the most common compatibility mistake.
- Installed paver driveway pricing in Enterprise runs $7,000 to $18,000 depending on square footage, base depth and whether the old surface is removed.
- Joint sand loss, edge restraint failure and settling near downspouts drive most repairs we see here. The paver itself is usually the last thing to fail.
Which Unilock Models This Applies To

Unilock products are sold through dealer networks rather than in a single nationwide catalog, so the exact series available in Enterprise can vary by supply yard. That matters when you’re matching a repair to an existing field. The structural lines we’re asked to match most often are Unilock Brussels Block and Brussel’s Dimensional, both tumbled units that read as a chunky European sett; Beacon Hill and Umbriano, which are the smooth-faced slabs people choose for modern driveways; and Courtstone and Thornbury for the older, more traditional look. Patios lean toward Umbriano, Beacon Hill and the thinner 60mm versions of the wall and cap pieces.
The two specs to confirm before anyone quotes you a repair are the unit thickness (60mm versus 80mm) and the face dimension (the actual top surface, not the catalog name). A driveway should be 80mm; a patio can be 60mm. Patching an 80mm driveway with 60mm units leaves you a visible step and a soft spot that fails within a season. The face dimension matters too, because Unilock tweaks proportions between regional runs of the same product line. If your driveway was laid more than a few years ago, a fresh batch of the “same” paver may be a few millimeters different, which is why we always measure the field and the joint gaps before ordering. That measurement, plus a sample paver pulled from an undisturbed edge, is what we hold up against the OEM unit and against quality aftermarket equivalents. Being an independent contractor, we are not affiliated with Unilock, but we work with the dealer channels that stock it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
- Joint sand washing out after rain. Polymeric sand sits in the joints and locks units together. When it starts disappearing down the slope, the joints open and water reaches the bedding layer, which is the beginning of every settlement problem we see in Enterprise.
- A paver rocking as you walk across it. This means the base or bedding under that single unit has lost compaction. Left alone, the rocking paver grinds against its neighbors and breaks their edges, turning a one-paver fix into a patch.
- Edge restraint pulling away at the driveway apron. The plastic or aluminum edge strip holds the whole field against lateral load. When the spikes pull out of our dry, shrinking soil, the outer course spreads and the whole pattern opens up from the edge inward.
- Efflorescence that won’t wash off. White mineral haze is normal on a new install and clears with a season of weather. Haze that returns again and again points to water moving through the base from below, not a surface stain.
- Settling in a low spot near a downspout or the garage slope. Enterprise lots often drain toward the driveway, and if the discharge point has shifted, water pools where pavers were never meant to stand in water. That localized sink is a drainage fix, not a paver replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what driveway and paver work runs in Enterprise, installed, with the parts and labor together so you can self-qualify before you call:
| Job | Installed price range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (full tear-out) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
What moves you up or down inside that range: total square footage, whether we tear out an old concrete or asphalt surface, how deep the compacted aggregate base has to go to handle our soil, and whether edge restraint and drainage corrections are part of the scope. The parts themselves (pavers, edge restraint, polymeric sand) are one line on your written quote, and labor is another. You see both before we start, and the price doesn’t grow once the work begins. Every completed project is covered by a written guarantee with the terms stated plainly, plus a free return visit if anything we installed fails.
DIY or Call Us?
You can safely check a few things yourself: rake back the loose joint sand to see whether a paver is truly rocking or just sitting slightly low, run a straight edge across the driveway to spot settling, look at whether the edge restraint is still tight against the outer course, and confirm the discharge point of your downspouts. What you can’t do safely or well is reset an 80mm paver field without disturbing the compaction under it, or judge whether a single patched unit will match its neighbors in thickness and face size. A patch on a bad base fails within a season, and then you’re fixing it twice. If the driveway is on a slope, the risk of a paver edge letting go under a wheel grows the longer it waits. Call (844) 797-6157 for a free estimate and we’ll tell you honestly whether you need a repair or a replacement.
FAQs

Unilock pavers themselves will outlast the surface around them, often 25 to 30 years or more. What ages in Enterprise is everything under and between them: the polymeric sand, the edge restraint and the base compaction. Most failures we fix here are bedding and drainage problems, not worn paver faces. Call (844) 797-6157 for an exact quote on a repair or replacement – estimates are free.
Yes, in most cases. Joint sand loss, edge restraint failure and isolated settlement are all repairable without replacing the whole field. A paver that is cracked through, or a section where the base has lost compaction over a wide area, usually calls for a partial tear-out. We’ll show you what’s repairable and what isn’t before you decide. Call (844) 797-6157 for a free estimate.
A joint sand and edge restraint repair is typically done in a day. A partial patch of a few square feet takes a day or two, depending on curing and matching. A full driveway replacement runs several days because the base has to be excavated, compacted in lifts and left to settle properly before the pavers go down. Call (844) 797-6157 and we’ll give you a real timeline with the written price.
We measure the existing field (thickness and face dimension), pull a sample from an undisturbed edge, and match it against what the dealer channels stock. If the exact Unilock unit isn’t available in the current run, we’ll show you the closest OEM or quality aftermarket match before you commit. Call (844) 797-6157 for a free estimate. We also work with KraftMaid, Cambria and Silestone on the interior side of the same home.
Our technicians have up to 22 years of experience matching pavers and repairing driveways like yours. Every free estimate comes with a written price before any work starts, and every project is backed by the 365-Day Done Right Promise. Call Mason Remodeling Enterprise at (844) 797-6157 to schedule your free estimate.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












