A Mason company - serving Enterprise, NV
An open living room and dining area after a whole-home remodel
Unilock · Enterprise

Unilock Fence Installation in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Fence Installation: The Enterprise Owner’s Guide

Unilock-compatible fence installation in Enterprise typically costs $3,500 – $9,000 installed, and the work is scheduled as a planned project – we walk the line, match the Unilock system already on your property, and give you a written price before anything gets dug. Most owners don’t wake up thinking about fence parts. They notice it on a Tuesday: a post that leans a half-inch more than it did last month, a panel that rattles when the wind comes off the desert, a gate latch that stopped catching. By the time the leaning gets obvious, the footing or the fastener set is usually the real story, and the Unilock system on top is just what you can see.

Two construction workers carrying drywall panel in a residential home hallway in Enterprise, NV

Call (844) 797-6157

Which Unilock Models This Applies To

A home office with a built-in desk and shelves

Unilock makes a range of hardscape and boundary systems, and the fence line sits at the intersection of several of them. What matters on your property is the system the existing fence uses, not the name on the brochure. So we start by reading what’s already there. Look for these identifiers before you call:

  • Post collar and cap profile. The shape of the post end tells you which series you’re working with. Square caps and chamfered caps are different systems and don’t swap.
  • Panel spacing at the pickets. Measure the gap, not the board. A half-inch difference is a different spec.
  • Footing reveal. How much of the footing shows above grade tells us how the post was set and whether the replacement needs a deeper pour.
  • Labeling. Unilock stamps or tags often live on the underside of a cap or the inside face of a terminal post. Take a photo.

On the OEM-vs-aftermarket question for Unilock specifically: genuine Unilock components are worth it at terminal posts and gates, where load concentrates. For mid-run pickets and caps, a quality aftermarket match in the same profile is a fair call and saves meaningful money. We’ll tell you which is which rather than upselling the whole line. Mason Remodeling Enterprise is an independent service provider, not affiliated with Unilock.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Fence Installation Is Failing

  • Leaning terminal posts. Usually a footing that wasn’t poured deep enough for Enterprise’s caliche-heavy soil, or water sitting against the base. The post itself is fine; the ground gave up.
  • Rattling or loose panels. Fastener corrosion or a bracket that was never torqued. Common after a few summers of 100-degree days cycling the material.
  • Gaps opening at the joints. Thermal movement working against a footing that’s shifting. If the gap grows season over season, it’s the base, not the panel.
  • Gate sag and latch miss. Hinge plates pulling from a post that’s rotating slightly. Left alone, it tears the post face.
  • Efflorescence and surface chalking. White bloom on the face after monsoon season. Sometimes cosmetic, sometimes the first sign water is trapped behind the system.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Fence installation in Enterprise runs $3,500 – $9,000 installed. That’s parts, labor, removal of the failed section, and disposal. What pushes you toward the top of that range: longer runs, more terminal posts, gate hardware, and footings that need to go deeper because of what’s under the ground. What keeps you near the bottom: a short run, sound footings, and a single section swap.

You get a written price before any work starts – line by line, parts and labor separated, no verbal estimates that grow on the final bill. If a repair or installation fails within 365 days of completion, we come back at no charge. That’s the 365-Day Done Right Promise, and it’s in writing with the terms spelled out.

Two construction workers carrying drywall panel in a residential home hallway in Enterprise, NV

DIY or Call Us?

Here’s the honest split. You can safely walk the line, photograph the caps, measure picket gaps, and note which posts lean. That information makes our quote faster and more accurate. Where fence work goes wrong for a homeowner is below grade and at load points: digging out a footing in Enterprise’s soil without hitting irrigation or utility lines, re-setting a post so it actually holds, and hanging a gate so it doesn’t sag in six months. Those aren’t safety hazards the way electrical or gas work is, but they are the difference between a fix and a repeat. If you’re unsure what failed, don’t guess at it. Call (844) 797-6157 and we’ll tell you what we’d check first.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA wide opening with a new beam where the kitchen wall was removedA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home office

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Mason in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Mason job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-6157
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Mason Remodeling Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch