







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Driveway & Pavers: The Enterprise Owner’s Guide
We install and repair ViewLux-compatible driveway and paver systems in Enterprise, and a full paver driveway replacement typically runs $7,000 – $18,000 installed, with pour-in-place concrete at $4,500 – $12,000 and asphalt at $3,500 – $9,000. Spot repair of a failed section – a settled panel, a heaved course of pavers, a crumbling apron at the street – is often far less. Because these are planned hardscape projects, we schedule the work, not rush it: your written price arrives before any material is ordered or any ground is opened.

Enterprise owners usually find the problem the way you did. A dip forms at the driveway edge where the desert soil has moved. A paver course rocks underfoot when the afternoon sun pulls the moisture out of the base. Water pools against the garage door instead of sheeting toward the street. Or the surface simply looks ten years older than the house because our UV load has bleached the color out of the finish.
One note up front: Mason Remodeling Enterprise is an independent service provider. We are not affiliated with ViewLux, and we don’t sell the brand. We install and repair to the system’s specifications, and we tell you honestly what’s worth replacing and what isn’t.
Key Takeaways
- Paver driveway replacement in Enterprise: $7,000 – $18,000 installed. Concrete: $4,500 – $12,000. Asphalt: $3,500 – $9,000.
- Resealing an existing hardscape: $250 – $700, the cheapest way to extend life if the base is still sound.
- Most “paver failures” in Enterprise are base failures, not paver failures. Diagnosing that wrong wastes money.
- We give a written, line-item price before work starts, and the work is covered by our 365-Day Done Right Promise.
Which ViewLux Models This Applies To

ViewLux hardscape systems come in more than one family, and the part that matters to you depends on which one is under your driveway. The paver lines are sold as modular units in set thicknesses – commonly 60mm and 80mm profiles for vehicular use, with the thinner unit for foot traffic only. The poured and panelized systems use expansion joints at fixed spacing, and the joint material itself is a replaceable part, not a permanent feature. Get this wrong and you’ll buy the right-looking paver in the wrong thickness, then wonder why the course sits proud of its neighbors.
To identify what you have, start with three things. Look for the manufacturer stamp on the underside of a loose unit or on the edge of a removed piece. Measure a single paver’s length, width, and thickness to the millimeter; nominal and actual rarely match. Then photograph the failed area with a tape measure laid across it. That photo plus the measurement is what lets us match the profile and color family accurately. If the label is gone, your home’s build date and the pattern layout will usually narrow it to one or two series.
On the OEM-versus-aftermarket question: for pavers, a quality domestic equivalent from a professional-grade hardscape line (Belgard, Unilock, and Techo-Bloc are the ones we work with most) will often match or beat the original for colorfastness and freeze-thaw durability, and it’s usually available faster than a factory-ordered match. For poured panels and proprietary joint or edge-restraint components, we spec to the ViewLux system’s tolerances so the repair integrates with what’s already there rather than fighting it. We claim no parts stock and carry no inventory – everything is sourced against your actual measurement for your actual project in Enterprise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ViewLux Driveway & Pavers Is Failing
- Ponding against the garage door or along one edge. The base has settled and the surface no longer drains away from the structure. Standing water at a slab edge is the first sign of a base problem, not a surface one.
- Individual pavers rocking or “walking” out of pattern. The bedding sand has washed out or the base wasn’t compacted to depth. In Enterprise, our summer heat cycling plus occasional monsoon runoff accelerates this at the driveway apron.
- Widened or missing joint sand, with weeds in the seams. Joint sand erodes seasonally. Once seams open, water gets under the units and the failure speeds up.
- Heaving or a lip where the driveway meets the street or sidewalk. Tree roots, soil expansion, or a shallow base cause this. It’s a trip hazard and a drainage problem in one.
- Faded, chalky, or spalling surface. UV exposure and thermal cycling break down the finish over time. Chalky color and surface flaking mean the top layer is going, even if the units are structurally sound.
If you’re seeing two or more of these, the driveway is telling you the base needs attention. Patching the surface without fixing what’s underneath just moves the problem a season down the road.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Enterprise, with the exact ranges we quote:
| Project | Installed Price Range |
|---|---|
| Paver driveway installation (full replacement) | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement (remove and redo) | $5,000 – $14,000 |
| Driveway sealing (existing hardscape, base sound) | $250 – $700 |
| Paver patio installation (if you’re coordinating both) | $3,500 – $11,000 |
What moves you up or down that range: square footage, base depth required for vehicular load, how much tear-out and haul-away is involved, edge restraints and joint material, and the pattern and unit you choose. Our price is written and line-item before work starts; parts, labor, tear-out, and disposal are broken out, so you can see exactly where the money goes. The finished installation is covered by the 365-Day Done Right Promise – if something isn’t right within a year of completion, we make it right at no cost to you. And if a repair or install fails, the return visit is free, no dispute process.
DIY or Call Us?
You can absolutely handle the checks yourself. Walk the driveway after a hard rain and note where water pools. Pull one loose paver and measure it. Check that joint sand is filled to within an eighth-inch of the chamfer. Photograph the apron where it meets the street. Those five minutes give us what we need to quote accurately and save you a diagnostic visit.
Where it goes wrong: replacing a single paver without matching thickness, or resealing over a base that’s already settled. You’ll seal in the problem and pay twice. And any work near the garage door opening, gas meter, or utility stub deserves a trained eye before a shovel goes in – nicking a line is a real hazard and a permit issue. If the base is moving, this isn’t a weekend project. We’re glad to give you an honest read on whether a repair will hold or a section needs rebuilding. Call (844) 797-6157 and we’ll schedule a free estimate.
FAQs

How long do ViewLux pavers last in Enterprise? A properly installed paver driveway holds up for decades in our climate, but the joint sand and seal need refreshing every few years. The pavers outlast the base in most failures – which is why we check the base first. Call (844) 797-6157 for a free estimate on your driveway.
Can my failing driveway be repaired instead of fully replaced? Often yes. If the base is sound and only a section has settled or heaved, a targeted repair costs a fraction of a full replacement. If more than about a third of the surface is moving, replacement usually wins on total cost. Call (844) 797-6157 and we’ll tell you which side of that line you’re on – the estimate is free.
How long does a paver driveway replacement take? Most residential driveways in Enterprise run a few days to about a week, depending on square footage, base prep, and weather. Tear-out and base work take the most time; setting the units is quick. We confirm the timeline in your written price before work starts. Call (844) 797-6157 to schedule your free estimate.
How do you source the right ViewLux-compatible material? We measure and photograph your existing system, match the profile and color family against professional-grade hardscape lines, and confirm the spec with you before ordering. We carry no parts inventory and stock nothing on a truck – every material is chosen for your specific driveway. That’s the honest way to get a match that lasts. Call (844) 797-6157 for a free estimate.
We also work with KraftMaid, Cambria, and Silestone on the interior side of the house, so if your hardscape project turns into a bigger exterior and interior plan, one call covers it.
For a written, line-item price on your ViewLux driveway or paver repair in Enterprise – with a real person on the phone around the clock – call (844) 797-6157. Every crew member is identity-verified and background-checked, you’ll receive their name and photo before the visit, and they’ll show a photo ID badge at your door. The estimate is free, the price is in writing before any work starts, and the craftsmanship is backed for a full year.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












