







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Enterprise Owner’s Guide
If you own a Wellborn hardscape spec and the driveway or pavers are failing, we install Wellborn-compatible driveways and pavers in Enterprise for $7,000 – $18,000 depending on square footage, base prep, and paver selection. We give you a written price before any work starts, and we confirm the exact crew member coming to your door – name, photo, and uniform – before the visit.

Most Enterprise homeowners find out something is wrong the same way: a paver rocks underfoot at the garage apron, a hairline crack spreads across the driveway after a summer of 110°F afternoons, or sand starts washing out along the edge every time the irrigation runs. Clark County’s caliche-heavy soil and monsoon runoff put real stress on any hardscape, and that’s usually where the first failures show.
Why Wellborn Ownership Matters Here
Wellborn pavers and driveway systems aren’t generic box-store product. Compressive strength ranges, thickness tolerances, and color-through construction vary by series, and the wrong replacement paver will look mismatched and fail faster. We help you identify the right one and install it correctly.
Key Takeaways
- Installed cost in Enterprise runs $7,000 – $18,000 for a full paver driveway, less for repairs and section replacement.
- Wellborn series compatibility matters – thickness and color batch have to match existing pavers or the joint lines show.
- We pull permits and pass inspection where Enterprise code requires it.
- Every install is covered by a written guarantee, with a 365-Day Done Right Promise on the work.
Which Wellborn Models This Applies To

Wellborn’s paver line covers several profiles, and knowing which one you have is the first practical step. The most reliable way to identify yours is to check the label on the original pallet tag or the homeowner documents you received at install – most Wellborn pavers are stamped or tagged with a series name and a batch code. If the tag is gone, measure the thickness of an existing paver at the edge. A digital caliper or even a good ruler will do; Wellborn typically runs within a tight tolerance band, and matching that dimension is what keeps your new section level with the old.
The second identifier is color and finish. Wellborn color is produced in batches, and a batch from a different production run can read slightly warmer or cooler in direct Enterprise sun. When we source replacement pavers, we compare against a sample from your existing driveway, not just a catalog photo. That’s the single most common compatibility gotcha we see: a homeowner orders the “same” paver from a different supplier, it arrives a shade off, and the patch job looks like a patch job forever.
On the OEM-versus-aftermarket question: for a full driveway replacement, quality aftermarket pavers that meet the same compressive and thickness specs are a legitimate choice and often cost less. For a partial repair patching into existing Wellborn, we strongly recommend matching the OEM series and, where possible, the same production batch. Mixing a generic paver into a Wellborn field is where homeowners end up calling us back six months later.
We also service KraftMaid, Cambria, and Silestone products if your project touches other parts of the home.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. This is almost always base failure, not paver failure. In Enterprise, caliche subgrade and poor drainage after a monsoon are the usual culprits, and the fix means rebuilding the base, not just resetting the top layer.
- Sand washing out of the joints. Polymer sand erodes when water runs across the surface without a proper slope away from the slab. If it keeps happening, the grading is off, not the sand.
- Hairline cracks in pavers after a hot summer. Thermal cycling in Enterprise – 110°F days and cooler nights – stresses pavers that were set on an uneven base. Cracks over a void are a base problem showing through.
- Efflorescence (white powdery bloom). Moisture trapped under the pavers wicks up and leaves mineral salts on the surface. It’s cosmetic at first, but persistent bloom points to a drainage issue underneath that will worsen.
- Color fading or a patch that no longer matches. UV exposure and batch mismatch. If your driveway has been patched before with a non-matching paver, that’s a sign the original spec wasn’t followed and it’s worth verifying before any new work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Enterprise, a full paver driveway installation runs $7,000 – $18,000 installed, and driveway replacement runs $5,000 – $14,000. If you’re comparing materials: concrete driveway installation is $4,500 – $12,000 and asphalt paving is $3,500 – $9,000, but pavers typically last longer and are repairable section by section, which is why most Wellborn owners stay with the material.
What drives the range: square footage, base depth required by your subgrade, whether old material needs full demolition and haul-off, drainage correction, and paver series. A straightforward 400-square-foot driveway on a good base sits near the bottom; a large driveway with caliche excavation and new grading sits higher.

- Paver driveway installation: $7,000 – $18,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing (maintenance): $250 – $700
- Paver patio installation (if bundled): $3,500 – $11,000
Every quote is line-item and in writing before work starts – no verbal estimates that grow. The installation is covered by a written guarantee, and if a repair or installation fails we come back at no charge.
DIY or Call Us?
Here’s the honest split. What you can safely do yourself: inspect for rocking pavers, photograph cracks and joint erosion, check that water drains away from your garage and not toward it, and pull your original Wellborn documents to identify the series. That’s all useful information to have before you call.
Where DIY goes wrong: base prep. The paver is not the hard part – the 4 to 6 inches of compacted aggregate base under it is. A homeowner who resets pavers on sand without fixing the base gets a repair that looks fine for a season and fails the next monsoon. Cutting pavers to fit also requires the right saw and a steady hand; a bad cut on a matched-batch paver wastes an expensive piece. We don’t carry stock on any truck – every paver is ordered to your spec.
If you’re unsure whether the issue is surface-level or base-level, call us at (844) 797-6157. We’ll tell you honestly which it is, and the estimate is free.
FAQs

A properly installed Wellborn paver driveway should hold up for 25 to 30 years or more, but base quality determines that number far more than the paver itself. In Enterprise, sun exposure and monsoon drainage are the two factors that shorten lifespan, so getting the grading right at install is what protects the investment.
Often yes. If the failure is isolated to a section – a sunken apron, a cracked paver over a void, or joint erosion from one bad slope – we can rebuild just that section and match the Wellborn series and batch. Call (844) 797-6157 and we’ll assess whether a partial repair makes sense or whether the base failure is widespread.
A small section repair typically takes one to two days; a full driveway replacement runs three to five days depending on square footage and base work. We schedule around your access needs and confirm timing in writing before the crew arrives.
We order to your identified series and batch, then verify against a physical sample from your existing driveway before installing. That’s how we avoid the shade mismatch that happens when someone orders by catalog photo alone – and it’s why we quote the correct part the first time.
Mason Remodeling Enterprise is an independent service provider and is not affiliated with Wellborn. We work with Wellborn-compatible materials and help Enterprise homeowners get the right product installed correctly. Whether you need a full driveway, a section repair, or just a straight answer about what’s failing and why, call (844) 797-6157 for a free estimate and a written price before any work starts.
Written by the team at Mason Remodeling Enterprise, serving Enterprise and nearby areas.












