







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Showers & Shower Remodeling in Enterprise, NV
A walk-in shower in Enterprise typically costs between $3,200 and $9,800, depending on whether we’re resetting a prefab pan or building a fully tiled, curbless enclosure. Curbless designs usually run $6,500 and up because the floor has to be recessed and waterproofed to slope correctly. We build showers that drain fast in Southern Nevada’s hard water and hold up through the seasonal temperature swings that crack cheap pans and pop bad tile.
Most of the showers we replace here were never built for this valley. A standard builder pan with a shallow lip will weep within a few years once calcium starts scaling the drain, and by the time a homeowner notices soft grout near the threshold, there’s usually tile behind it that’s already loose. Walk-in showers solve that with a single sloped surface and a linear drain you can actually clean. If you’re reworking more than the shower, start with our Bathroom Remodeling page for the full-scope picture. Either way, our line is open around the clock at (844) 797-6157.
We’re part of Mason Remodeling Enterprise, and every shower we put in starts with a written price before a tile is cut. Our technicians have up to 22 years of experience, and every crew member who walks into your home is background-checked, identity-verified, and introduced to you by name and photo before the visit.

Key Takeaways
- Walk-in shower remodels in Enterprise run roughly $3,200 to $9,800, with curbless and fully tiled builds at the top of the range.
- Hard water and daily heat cycles are the two things that wreck showers fastest in Enterprise – the right waterproofing and drain choice decide how long yours lasts.
- You get a written price before work starts, a photo-ID’d technician at the door, and a 365-day Done Right Promise on the finish.
When You Need Walk-In Showers & Shower Remodeling
Some shower problems are cosmetic. Others are an early warning that water is already getting where it shouldn’t. Here’s what our crews run into most often around Enterprise:
- Hairline cracks in the pan. Common in homes built through the 2000s housing boom, where fiberglass pans took a beating. A crack is rarely just a crack – it usually means the subfloor underneath has been wet for a while.
- Loose or hollow-sounding tile. Tap along the shower wall. A dull thud instead of a solid rap means the thinset has let go, often because the original backer was moisture-resistant drywall rather than a proper waterproofing board.
- Mold returning after cleaning. If a shower grows black spotting behind the caulk line every few months, moisture is trapped behind the tile, not just sitting on it. That’s a rebuild, not a re-caulk.
- A low step-over you can’t clear safely. We install a lot of curbless showers for older adults in the 89031 area who want to stay in their home and stop stepping over a 15-inch tub wall. Grab bars and a fold-down bench get built in at the same time.
- Water spots that won’t scrub out. Enterprise water runs hard. Etched glass and white mineral film on tile are signs the enclosure has reached the end of its practical life.
- A shower too small to move in. A 30-inch alcove adds to a tight morning. Knocking out a non-load-bearing wall to gain two feet can turn a cramped stall into something you can actually turn around in.

Our Walk-In Showers & Shower Remodeling Process
Every shower project follows the same order, whether it’s a curbless walk-in or a tile refresh. The point of the sequence is that nothing gets buried that we can’t show you later.
- Free in-home assessment and written price. We measure the space, check for hidden water damage, and talk through drain placement, curb height, and bench options. Before we leave, you get a written price covering materials and labor. No verbal ballpark that grows on the final bill.
- Who’s coming, and how you’ll know. Under The Threshold Standard, the technician assigned to your shower is identity-verified, and you receive their name and photo before the visit. At the door they show a photo ID badge and arrive in a clean uniform.
- Demo and waterproofing. We pull the old pan and tile, inspect the framing and subfloor, and fix anything the demo exposes – rotted studs, a bad drain connection, an out-of-level floor. Then the waterproofing goes in: a bonded membrane and a sloped mud bed for curbless, or a sealed system over a manufactured pan. A Schluter strip – the metal trim that caps the edge where tile meets the floor – goes on after the tile is set.
- Tile, glass, and fixtures. We set the wall tile, grout, seal, and hang the shower door and any glass panels. Fixtures run through trusted names like Moen and Kohler, and we can spec a frameless enclosure if you want the cleaner line. Hardware is chosen for hard-water life, so it stays looking right.
- Final walkthrough and the 365-Day Done Right Promise. We test the drain, check for any weep or pooling, and walk the job with you line by line. If anything isn’t right within 365 days of the completion date, we return and make it right at no cost. A free second visit covers any repair or installation that fails.
If the shower is part of a larger remodel, we sequence it with surface and cabinet work through vetted partners like Cambria and KraftMaid. Our Bathroom Remodeling in Enterprise page covers that broader scope.
Walk-In Showers & Shower Remodeling Pricing in Enterprise
Enterprise shower pricing mostly comes down to what’s behind the tile and whether the floor needs to be recessed for a curbless drain. Here are the ranges we work from:
| Scope | Typical price range |
|---|---|
| Tile refresh over a sound, existing pan | $3,200 – $4,800 |
| Full rebuild: new pan, waterproofing, tile | $5,200 – $7,400 |
| Curbless walk-in with recessed floor and linear drain | $6,500 – $9,800 |
| Accessibility add-ons (grab bars, bench, handheld) | $600 – $1,800 |
| Frameless glass enclosure | $1,200 – $2,600 |
What moves you within that range? Wall removal and re-framing, a switch to a linear drain, water damage that has to be repaired before we can waterproof, and premium tile or hardware choices. A simple tile-over is the low end; a fully tiled curbless shower with a bench and frameless glass is the high end.
We don’t quote over the phone on a shower – too much hides behind a clean-looking wall. The assessment is free, and the written price you get is the price you pay unless you approve a change. Call (844) 797-6157 to book the assessment, and a live person answers around the clock, weekends included.
FAQs – Walk-In Showers & Shower Remodeling
How much does a walk-in shower cost in Enterprise?
A walk-in shower remodel in Enterprise typically runs $3,200 to $9,800, with most full rebuilds landing between $5,200 and $7,400. A curbless, fully tiled shower with recessed flooring and a linear drain sits at the top of that range because of the extra waterproofing and slope work. Call (844) 797-6157 for an exact written quote – the assessment is free.
Can you convert my tub into a walk-in shower?
Yes – a tub-to-shower conversion is one of our most common Enterprise projects, and a standard 60-inch tub alcove converts cleanly to a curbless or low-curb walk-in. We remove the tub, reroute the drain, rebuild the pan, and waterproof the enclosure, usually in one visit for assessment and a few working days for the build. Call (844) 797-6157 and we’ll tell you what your specific alcove needs.
How long does a walk-in shower remodel take?
Most Enterprise walk-in showers are finished in five to eight working days, with curbless builds and water damage pushing toward the longer end. A tile refresh over a sound pan can go faster. Call (844) 797-6157 and we’ll give you a realistic schedule with your written price.
Is it cheaper to repair my shower or replace it?
If the pan and waterproofing are intact and only the surface is worn, a repair is usually cheaper. Once there are pan cracks, recurring mold, or hollow tile, replacement is the better spend – patching a failing shower typically wastes money and the problem comes back. Call (844) 797-6157 and we’ll tell you honestly which side of that line your shower is on before you commit.
Why Homeowners in Enterprise Choose Mason Remodeling
When someone opens their door to a crew, that’s a real decision – especially for older adults living alone and parents home with young kids. We built our process around that. Every technician is background-checked and identity-verified, you get their name and photo before the visit, and they show a photo ID badge at the door. You get a written price before work starts, never a verbal estimate. And the finished shower is covered by a written guarantee with terms stated plainly – 365 days from the completion date, with a free return visit if anything fails.
We’re part of the Threshold Group family of home-service companies, and each Mason Remodeling Enterprise location holds to Threshold Verified standards on every job. Modern modular partners like Cover and Dvele have made prefab shower pans and surrounds a real option for some builds, and we’ll tell you when one makes sense and when a site-built tile job is the better call.
Ready to stop stepping over a cracked pan or a tub wall? Call (844) 797-6157 for a free estimate on walk-in showers and shower remodeling in Enterprise. A live person answers every call, day or night – no call trees, no voicemail.
Written by the team at Mason Remodeling Enterprise, serving Enterprise.


