







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Enterprise, NV
Vanities, tile and fixtures are the three surfaces a bathroom is judged by: the cabinet and counter you touch every morning, the floor and shower walls underfoot, and the faucets, drains and trim that have to work every single day. In Enterprise, most of the bathroom work we quote at Mason Remodeling comes down to these three things, because they wear out faster here than homeowners expect. If you want the full scope, start with our Bathroom Remodeling service, then narrow in on the pieces below.
What sets us apart on this work is not the tile saw. It’s who walks through your door. Every technician is background-checked, identity-verified and introduced to you by name and photo before the visit, and they show a photo ID badge when they arrive. You get a written price before any work starts. And the finished job is covered by our 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you. Call (844) 797-6157 and a live person answers, day or night.
Key Takeaways
- Vanity, tile and fixture projects in Enterprise typically run $1,800 to $9,500 depending on scope and material grade.
- A written price is delivered before any work begins – never a verbal estimate that grows later.
- Every crew member is verified through The Threshold Standard: background-checked, uniformed, badge on arrival, name and photo sent ahead.
- Our technicians have up to 22 years of experience with tile setting, vanity installs and fixture work.
- 365-Day Done Right Promise covers the work for a full year from the completion date.

When You Need Vanities, Tile & Fixtures in Enterprise
Enterprise sits in the southwest valley, where the water runs hard and the summer heat pushes indoor humidity swings that punish caulk lines and grout. That combination shortens the life of bathroom finishes here compared to cooler, softer-water climates. These are the situations homeowners call us about most.
- Grout that keeps cracking or turning dark. In Enterprise, we regularly see grout failures on shower floors where the original install used cement-based grout with no movement joint. Re-grouting alone won’t fix it if the substrate is moving.
- A vanity that’s swollen, sagging or peeling. Particleboard cabinets and MDF doors don’t survive a slow leak under the sink. Once the toe kick bulges, the cabinet is done; it’s a replacement, not a repair.
- Original builder-grade tile from the mid-2000s. A lot of Enterprise homes were built in that window, and the 4-inch white backsplash tile and beige floor tile are at the end of their service life. Cracking at the corners usually means the thinset has let go.
- Faucets that drip or fixtures that look dated. A dripping Moen or Kohler cartridge is a small job. A shower valve that no longer holds temperature is a bigger one, because the wall has to open up.
- You’re selling or refinishing before a move. A vanity, tile and fixture refresh is one of the highest-return bathroom updates in the southwest valley, and it’s faster than a full gut.
- Accessibility changes for a parent or grandparent. A low-threshold shower entry, a comfort-height vanity and grab-bar-ready blocking behind the tile all get decided at the same stage – the tile and fixture stage.
Our Vanities, Tile & Fixtures Process in Enterprise
We keep this work predictable because the surprises in a bathroom almost always come from what’s behind the wall. Here’s the sequence we follow on every project.
- On-site measurement and a written price. We measure the vanity opening, check the floor for deflection, and look at the existing plumbing rough-in before quoting. You get the price in writing before anything is ordered or removed.
- Material selection with the right partners. Vanities come through cabinetry lines like KraftMaid and Wellborn. Counters move through Cambria, Silestone and Caesarstone. Fixtures come from Kohler, Moen, Toto and Grohe. If a prefab or panelized option makes sense for a tight turnaround, we’ll talk through choices like Cover, Dvele or Boxabl units and whether they fit your layout. You don’t have to chase these brands yourself; they’re accessible through us.
- Protected demolition and haul-away. Floors get covered, the work zone gets sealed with plastic and zip walls, and old tile, vanity and fixtures come out in one pass. We haul it away the same day.
- Substrate and waterproofing. This is the step homeowners never see and the one that determines whether the tile lasts. We use a bonded waterproofing membrane on shower walls and floors, and a Schluter strip at the edge where tile meets flooring – that’s the metal trim that seals the transition so the edge doesn’t chip or collect water.
- Tile setting, vanity install and fixture trim-out. Tile goes down level and lippage-free, the vanity gets shimmed and secured to studs, and fixtures get set with new supply lines and shutoff valves. We test every drain and every valve before we call it done.
- Walkthrough and written guarantee. We walk the room with you, point out what was done, and hand over the written guarantee with its coverage terms spelled out – including what’s excluded and for how long.

Vanities, Tile & Fixtures Pricing in Enterprise
Here are honest ranges so you can size the project before you call. These are 2026 southwest valley numbers for the Enterprise and greater Las Vegas area, and they assume standard-grade materials unless noted.
| Scope | Typical range | Notes |
|---|---|---|
| Single vanity replacement (stock cabinet, quartz top, faucet) | $1,800 – $3,400 | Includes removal, install, new supply lines and shutoffs |
| Double vanity with custom cabinetry and stone counter | $4,200 – $7,500 | KraftMaid or Wellborn cabinetry, Cambria or Silestone top |
| Tub-to-shower conversion with tile and waterproofing | $6,500 – $12,000 | Bonded membrane, Schluter trim, new valve and trim kit |
| Floor tile only (40-60 sq ft bathroom) | $1,400 – $3,200 | Includes demo, prep and thinset; larger format raises the low end |
| Shower wall tile only (existing pan) | $2,200 – $4,800 | Waterproofing required; we won’t tile over a failed pan |
| Fixture-only swap (faucet, shower head, toilet) | $450 – $1,100 | Per fixture; valve replacement adds to that |
A few things move these numbers. Tile size matters: a 24×48 porcelain panel takes more skill and more waste than 12×12, so the labor line climbs. Natural stone costs more than porcelain and needs sealing. Custom vanity widths, moving a drain, or adding a second sink all add. And if we open a wall and find old galvanized plumbing or a rotted subfloor, that’s a change order – which is exactly why the price is written down first. A free estimate costs you nothing, and you’ll have the number in hand before you commit.
To put this in context with the rest of a bathroom, see our Bathroom Remodeling in Enterprise page, which covers the full remodel scope and where these pieces sit within it. You can also read through our home page for how we work across every project.
Why Homeowners in Enterprise Choose Us for This Work
The Threshold Standard is our crew verification process, and it’s not a marketing line. Every technician is background-checked, identity-verified, and arrives in a clean marked uniform with a photo ID badge. You’ll get their name and photo before the visit, so you know who’s pulling into your driveway. For a parent home alone with kids, or an older adult who’s been burned by a no-show contractor, that’s the part that matters.
Our own technicians have up to 22 years of experience, which shows up in the details: checking floor deflection before setting large-format tile, sealing the tile-to-floor transition with a Schluter strip instead of a bead of caulk, and testing shutoffs before the vanity goes in. We’re part of the Threshold Group family of home-service companies, and every Mason Remodeling location is independently owned and operated but held to the same Threshold Verified standards. A written price is never optional and never waived, and the free second visit if a repair or installation fails is real – no charge, no dispute process.
For planning help, these guides cover the details homeowners ask about most:
- Vanity replacement in Enterprise – sizing, cabinet grades and how to choose.
- Shower tile installation in Enterprise – waterproofing done right.
- Floor tile in Enterprise – deflection, thinset and grout choices.
- Faucet and fixture replacement – Kohler, Moen, Toto and Grohe options.
- Tub-to-shower conversion in Enterprise – what to expect from the layout change.
- Bathroom waterproofing in Enterprise – why the pan fails first.
- Grout repair in Enterprise – when re-grouting is enough and when it isn’t.
- Accessible bathroom design – blocking, comfort-height and curbless entries.
- Bathroom remodeling in Henderson – nearby city service.
- Bathroom remodeling in North Las Vegas – nearby city service.
- Bathroom remodeling in Paradise – nearby city service.
FAQs – Vanities, Tile & Fixtures in Enterprise
How much does a vanity, tile and fixture refresh cost in Enterprise?
Most projects land between $1,800 for a single vanity swap and $9,500 for a combined vanity, floor tile and shower tile refresh with new fixtures. The range depends on cabinet grade, tile format, stone type and whether plumbing has to move. Call (844) 797-6157 for an exact quote – estimates are free and you get the number in writing.
Can you install a new vanity and tile the floor in the same visit?
Usually yes, if the floor is level and the plumbing rough-in doesn’t need to move. We sequence it so the floor tile goes down first, cures, then the vanity sets on top. A typical single-vanity plus floor-tile job runs two to three working days. Call to schedule a walkthrough and we’ll tell you what’s realistic for your bathroom.
Is it cheaper to reface a vanity or replace it?
Replacement is usually the better value in Enterprise because most failing vanities here have water damage at the toe kick and cabinet box, not just worn doors. Refacing only makes sense if the box is solid and dry. We’ll check for swelling and soft spots before recommending either path – call us and we’ll tell you what we find.
What brands of fixtures and tile do you work with?
We work with Kohler, Moen, Toto and Grohe for fixtures, and KraftMaid and Wellborn for cabinetry, with counters from Cambria, Silestone and Caesarstone. Tile selection is yours; we’ll recommend format and slip rating based on where it’s going. For a list of what fits your budget, call (844) 797-6157 and we’ll walk you through it.
Written by the team at Mason Remodeling Enterprise, serving Enterprise.
Ready to fix the grout, swap the vanity or retile the shower? Call (844) 797-6157 for a free estimate. A live person answers around the clock, every day of the year, and you’ll have a written price in hand before any work begins – backed by the 365-Day Done Right Promise.


